Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: AlexMitton.co.uk on 27 August 2009, 05:53:20
-
Morning OOF,
My Omega is leaking Automatic Transmission Fluid due to a Bung/Seal which has gone missing?
Does anybody know the proper name for it? Because I cant find it anywhere?
Note to Mod: Note sure to where to post this.
Thanks alot,
Alex
-
the best thing to do is first check the filler hole has got its plug in [on edge of large sump drivers side], if thats in situ then id give the g/box a good clean, top it up [follow "how to guide"] then take it for a run & see where the leak is coming from. :y
-
If the rubber bung you mean is the one underneath on the bell housing, then atf leakage from here likely caused by g/box front seal knackered - a gearbox out job :(
-
I've had it up on the lift in my mates garage.
I can see a whole where something goes, and oil inside it.
-
A photo would help to identify this mysterious bung (or a clearer description)
-
I've had it up on the lift in my mates garage.
I can see a whole where something goes, and oil inside it.
I'm with dbug on this one. ;)
-
A photo would help to identify this mysterious bung (or a clearer description)
OK, I'll get it back on the lift and take a photo.
Cheers
-
I've had it up on the lift in my mates garage.
I can see a whole where something goes, and oil inside it.
I'm with dbug on this one. ;)
Thanx mate - been there, done it!! Put new seal on, still leaked now swapped box and ok!!