Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bigdods on 11 September 2009, 14:21:04

Title: Elite Self Levelling dampers part numbers ?
Post by: bigdods on 11 September 2009, 14:21:04

Would anyone be able to look up the correct part number for the self levelling rear dampers on an Elite Facelift saloon for me. Picking mine up tomorrow and want to double check the part number when collecting.

I assume I dont need to have the Geo re-done when changing the dampers....

Cheers

Dodsy

ETA I did a search of previous posts but couldnt find any with part numbers in

Title: Re: Elite Self Levelling dampers part numbers ?
Post by: charlie on 11 September 2009, 15:46:05

could be two depending on chassis no
w1000001-x1999999 part no 72119033
from y 1000001 part no 72119084
these numbers are out of a old book so might have changed

Title: Re: Elite Self Levelling dampers part numbers ?
Post by: bigdods on 11 September 2009, 21:31:36

cheers  :y

Title: Re: Elite Self Levelling dampers part numbers ?
Post by: hotel21 on 11 September 2009, 21:48:51

If changing the rear shocks like for like there is no need for the suspension geometry to be redone, according to Tony Bones at WIM.   :y

Title: Re: Elite Self Levelling dampers part numbers ?
Post by: feeutfo on 12 September 2009, 13:55:24

as said, def no need for set up. Its just 2 bolts and top nuts with air lines. Easy job and nothing to adjust. Simples. :-)