Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: rossi123 on 15 September 2009, 20:59:23

Title: bumper on facelift
Post by: rossi123 on 15 September 2009, 20:59:23

does anyone know were the bolts are for the bumper need to get it off anyhelp would be appreciated
thanks paul :)

Title: Re: bumper on facelift
Post by: Welung666 on 15 September 2009, 21:01:06

Quote

does anyone know were the bolts are for the bumper need to get it off anyhelp would be appreciated
thanks paul :)

Front or rear?

Title: Re: bumper on facelift
Post by: rossi123 on 15 September 2009, 21:03:32

sorry i'm a prat haha the front  :)

Title: Re: bumper on facelift
Post by: Welung666 on 15 September 2009, 21:08:11

Easy.....

4 x torx screws, 1 each side inside front wheel arch, 1 each side under the bottom of the bumper nearest fron tyre.

3 x plastic push tabs underneath. Pull out the centres then pop out the plastic lugs

And finally 2 sinilar push tabs on the top of the bumper.

As you pull it forward you'll see the 1 elec connector that needs to come off.

Only other thing is the headlight washers (if fitted), they are just push on pipes

HTH :y

Lee.

Title: Re: bumper on facelift
Post by: rossi123 on 15 September 2009, 21:11:14

thanks very much your a star  :)