Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: shay oneill on 28 July 2009, 19:17:55

Title: clutch help !!!!!!!
Post by: shay oneill on 28 July 2009, 19:17:55
hi i need help with my 3.2 mv6 i was looking on ebay and was wonderin if a 3.0 clutch wod fit my 3.2
Title: Re: clutch help !!!!!!!
Post by: Boiler Man on 28 July 2009, 20:35:42
Hi

I've been recommended to these www.buypartsby.co.uk by the lads on here for mine.

Give them a ring and ask, they are very helpfull and very good value. Mine arrived the following day :y
Title: Re: clutch help !!!!!!!
Post by: shay oneill on 28 July 2009, 21:42:45
Thanks
Title: Re: clutch help !!!!!!!
Post by: deviator on 29 July 2009, 09:28:20
Don't forget it's worth doing the clutch clylinder in the box at the same time.

Title: Re: clutch help !!!!!!!
Post by: shay oneill on 16 September 2009, 17:06:37
I Have Just Found Out That A 2.5 MV6 Clutch Will Fit My 3.2MV6 :D 8-) :y :) ;D ::)
Title: Re: clutch help !!!!!!!
Post by: Elite Pete on 16 September 2009, 17:23:07
Quote
I Have Just Found Out That A 2.5 MV6 Clutch Will Fit My 3.2MV6 :D 8-) :y :) ;D ::)
I've never heard of one of those before, they're normally 2.6, 3.0 or 3.2. I believe the friction plate is the same :y
Title: Re: clutch help !!!!!!!
Post by: Marks DTM Calib on 16 September 2009, 19:18:13
Quote
Don't forget it's worth doing the clutch clylinder in the box at the same time.


Nah, unlike the front wheel drives, the coaxial slave on the Omega is bullet proof
Title: Re: clutch help !!!!!!!
Post by: Andy H on 16 September 2009, 19:28:10
Quote
Quote
Don't forget it's worth doing the clutch clylinder in the box at the same time.


Nah, unlike the front wheel drives, the coaxial slave on the Omega is bullet proof
The flexible pipe isn't however (and it is a gearbox out job to change it :( )
Title: Re: clutch help !!!!!!!
Post by: shay oneill on 17 September 2009, 10:12:23
wel i rang www.buypartsby.co.uk of there number on there website and the told me the 3.0 wont fit but the 2.5 will