Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bluebuss on 10 October 2009, 18:16:53

Title: adjuster screw ....ar25 autobox????
Post by: bluebuss on 10 October 2009, 18:16:53

i found the torque settings here somewhere and i cant find it again.........
help me please....
ive got the cap of with the four bolts and have backed of the lock nut.
cant remember if it was 25nmeters or 5nmeters then back it off 5 complete turns???
anyone please..... :-/

Title: Re: adjuster screw ....ar25 autobox????
Post by: RobG on 10 October 2009, 20:09:25

When the sump is removed there is a dome held on with 3 or 4 bolts. Remove it and there is a threaded screw with a lock nut, release it then tighten the screw to 5nm torque, back off five turns and then tighten the lock nut, this sets the brake band. Replace the dome then it`s a gearbox re-fill :y

Title: Re: adjuster screw ....ar25 autobox????
Post by: bluebuss on 10 October 2009, 21:28:53

tanx a lot, the voice of experience... :D
i do think its buggered but the wife insists i crawl under before we search for the inevitable ar35 box.once again, merci beaucoup. :-X

Title: Re: adjuster screw ....ar25 autobox????
Post by: Jimbob on 10 October 2009, 21:29:52

I was going to do this on my replacement box, but 5nm torque wrench's in short supply  ;D ;D