Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: PaulW on 08 December 2007, 22:18:13

Title: Mechanical Aptitude Test....
Post by: PaulW on 08 December 2007, 22:18:13

http://www.forddoctorsdts.com/quizzes/MechanicalAptitude.php

(http://i130.photobucket.com/albums/p266/PaulW21781/mechanictestthing.jpg)

 8-)

Title: Re:  Mechanical Aptitude Test....
Post by: cem_devecioglu on 08 December 2007, 22:53:45

Here's mine

(http://i181.photobucket.com/albums/x80/mecdv6/testsonucu.jpg)

Title: Re:  Mechanical Aptitude Test....
Post by: CaptainZok on 08 December 2007, 22:54:03

Beat you.

(http://i107.photobucket.com/albums/m302/CaptainZok/testscore.jpg)

 :y

Title: Re:  Mechanical Aptitude Test....
Post by: speakingclock on 08 December 2007, 23:04:30

Same as me Cheers.

Tony

Title: Re:  Mechanical Aptitude Test....
Post by: Martin_1962 on 08 December 2007, 23:07:10

98% and I think it is the last one or the venturi one.

I said atmospheric pressure on the last which it actually is

Venturi I guessed

Title: Re:  Mechanical Aptitude Test....
Post by: Golfbuddy on 08 December 2007, 23:08:44

OK, I got 430 points at 86%.

I don't know how to post a screen shot though. Still a pass is a pass I suppose.  :y

Title: Re:  Mechanical Aptitude Test....
Post by: The Cambelt Kid on 08 December 2007, 23:11:14

nur nur nur nur nur

(http://marcblount.co.uk/omega/test.jpg)

Title: Re:  Mechanical Aptitude Test....
Post by: cem_devecioglu on 08 December 2007, 23:13:16

hi,
press ctrl-printscreen together

open paint and from the menu choose paste..then with the upper leftmost cutting tools "quadrilateral" cut
open a new file paste again and save..Then upload in photobucket..click the image tag ...
 
and paste in reply in OOF screen

Title: Re:  Mechanical Aptitude Test....
Post by: cem_devecioglu on 08 December 2007, 23:22:57

errm..How is that  ;D ;D

(http://i181.photobucket.com/albums/x80/mecdv6/hile.jpg)

Title: Re:  Mechanical Aptitude Test....
Post by: Golfbuddy on 08 December 2007, 23:25:57

Quote

hi,
press ctrl-printscreen together

open paint and from the menu choose paste..then with the upper leftmost cutting tools "quadrilateral" cut
open a new file paste again and save..Then upload in photobucket..click the image tag ...
 
and paste in reply in OOF screen

Cheers, too late now, I closed the window and I'm not going through that again. Good to know for next time though. I never thought about using 'paint'.  :y

Title: Re:  Mechanical Aptitude Test....
Post by: MartinP on 09 December 2007, 00:18:12

Just took this test, scrapped through!  ::)

(http://i3.photobucket.com/albums/y99/issunaz/Mechresult08-12-07a.jpg)

Title: Re:  Mechanical Aptitude Test....
Post by: Markjay on 09 December 2007, 00:40:18

Quote

98% and I think it is the last one or the venturi one.

I said atmospheric pressure on the last which it actually is

Venturi I guessed

You can review the test, and the atmospheric pressure is the correct answer so it must be the venturi... which incidentally i got wrong.

Title: Re:  Mechanical Aptitude Test....
Post by: Marks DTM Calib on 09 December 2007, 08:46:25

100%....there are a few trick ones....the combustion engine is one of them!

Th venturi is a classic one that people get wrong....if you think of a carb, the pressure in the venturi is less hence why it draws the fuel in......so the level will be lower

Title: Re:  Mechanical Aptitude Test....
Post by: sir moanalot on 09 December 2007, 09:58:30

88% i remembered something from the spanners!

Title: Re:  Mechanical Aptitude Test....
Post by: Tab on 09 December 2007, 10:42:18

oh dear, i got 68% ;D ;D

Title: Re:  Mechanical Aptitude Test....
Post by: Martin_1962 on 09 December 2007, 12:09:05

Quote

errm..How is that  ;D ;D

(http://i181.photobucket.com/albums/x80/mecdv6/hile.jpg)

You beat me!

Title: Re:  Mechanical Aptitude Test....
Post by: bertiecbx550 on 09 December 2007, 12:51:15

oh bugga i better leave that clutch alone... i got 50% :( :(

Title: Re:  Mechanical Aptitude Test....
Post by: Paulus on 09 December 2007, 14:56:48

I'm a Mechanical Design Engineer and I got 98%...I think my job is safe.