Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: damage consultant on 12 November 2009, 14:18:10

Title: 2.5 v6 cutting out
Post by: damage consultant on 12 November 2009, 14:18:10
My mate at my local garage has a meega2.5 V6(auto) on a V plate which keeps cutting out when it comes to a halt like stopping at traffic lights etc.
He done both clip test and on computer both came up with code 19 incorrect rpm signal.
he has replaced the crank sensor with the two types that are listed. no differance any ideas.
cheers John
Title: Re: 2.5 v6 cutting out
Post by: Jimbob on 12 November 2009, 14:25:12
clean the ICV and breathers.

a 19 wont go immediately on replacing a crank sensor, so dont ignore that code either.  a not present code can stay stored for some time, but does show up on paperclip test, clear with a computer if you can)

replace with a genuine vauxhall one (if thats not whats been done already)
Title: Re: 2.5 v6 cutting out
Post by: damage consultant on 12 November 2009, 14:29:51
I'm sure he swaped icv from another customers car and its running fine i'll let him know about it .
Thanks John
Title: Re: 2.5 v6 cutting out
Post by: Marks DTM Calib on 12 November 2009, 15:00:51
CLEAN the idle valve d breathers though.....V6 ICV's are as a rule trouble free!