Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: lou on 12 November 2009, 19:09:58
-
Recently my oil filler pipe has been leaking a slight bit of oil (Top of cam cover)and eventually has dropped onto the exhaust hence the smell occasionally. when removed and wiped everything is ok for a little while but then some oil appears again. the pipe itself does feel a little loose when correctly positioned..oh and I have tried just the filler cap but with the same problem. It appears that both "O" perhaps are worn. Is that feasible.
For Info: 1.Cam covers changed 15 months ago
2. Ecotec box replaced and clean
3. Breathers has clean as a whistle
4. Vx oil used
5. No other problems.
-
yes would say 'O' is worn out or the spring inside has gone week, would just get a new one. :y
-
What do mean by the "Spring"?
-
Replace o-rings mate
-
What do mean by the "Spring"?
on some there is a spring inside that when you turn it, it will pull its self down on the rubber.