Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: neilr on 19 November 2009, 18:40:06

Title: icv on 2.6
Post by: neilr on 19 November 2009, 18:40:06

does the 2.6 have an icv and could it cause non starting problems

Title: Re: icv on 2.6
Post by: The Red Baron on 19 November 2009, 18:43:20

as in, doesnt try to start ?

Title: Re: icv on 2.6
Post by: neilr on 19 November 2009, 18:46:26

as in turned over wouldnt fire no eml lights on dash showing went back 5 min later started

Title: Re: icv on 2.6
Post by: tunnie on 19 November 2009, 18:47:11

there is no ICV on a 2.6, do the pedal trick to get codes, bet you get a 19 - Crank sensor ;)

Title: Re: icv on 2.6
Post by: The Red Baron on 19 November 2009, 18:50:28

Quote

there is no ICV on a 2.6, do the pedal trick to get codes, bet you get a 19 - Crank sensor ;)

thats what i would go for tbh. :y

Title: Re: icv on 2.6
Post by: neilr on 19 November 2009, 18:51:26

ok tunnie tried pedal trick when it happened last night got nothing, not sure i did it right though will try again tomorrow providing the wife doesnt ring tonight when she finishes work at 10:30 to say its done it again. my suspicion was c/s sensor after reading many threads on here but just wanted to see if i was on the right track.

Title: Re: icv on 2.6
Post by: feeutfo on 19 November 2009, 21:48:58

should be 4 digit code on that engine. Will probably still mean crank sensor though...0335 is it? Something like that anyway.

Title: Re: icv on 2.6
Post by: Welung666 on 19 November 2009, 21:53:34

Quote

should be 4 digit code on that engine. Will probably still mean crank sensor though...0335 is it? Something like that anyway.

Yes P0335 is the DBW version of a 19