Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: pscocoa on 23 December 2009, 10:59:27

Title: code P1625 (2) NP Internal Power Control
Post by: pscocoa on 23 December 2009, 10:59:27

Did not find this code in maintenence guides section for 3.2 full text according to VX is

P1625 (2) NP Internal Power Control Final Stage Low input.

They had not seen this before and decided it was cold weather!!

Any advice?

Why does this happen when my wife is driving - suppose first advice is stop her driving it.

Title: Re: code P1625 (2) NP Internal Power Control
Post by: Jimbob on 23 December 2009, 11:02:32

I cant see that one in TIS  :-?

Title: Re: code P1625 (2) NP Internal Power Control
Post by: Jimbob on 23 December 2009, 11:06:58

Found it, its a gearbox error...


Final stage diagnosis in control unit
Short to voltage in circuit to control unit terminal 52, 5
Above condition must be fulfilled for at least 0.02 s .
Effect:

"Emergency Mode" is activated
The malfunction indication is switched on.
Concerned Terminals:
52, 5


not especially useful....

Title: Re: code P1625 (2) NP Internal Power Control
Post by: pscocoa on 23 December 2009, 11:21:40

Thanks for that - eml light came on following clunk from gearbox as she was emerging from patch of ice.

EML light now off and codes cleared.

It has to do 1000 miles next week so fingers crossed.

Title: Re: code P1625 (2) NP Internal Power Control
Post by: Jimbob on 23 December 2009, 11:24:02

wonder if one of the connectors got wet and shorted out  :-?

monitor for reoccurence probabaly the best action...

Title: Re: code P1625 (2) NP Internal Power Control
Post by: pscocoa on 23 December 2009, 11:32:42

yes - will do - I get the eml light on once in a while - restart and everything is fine - happens say 3 times a year.