Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: GrayUK on 01 January 2010, 19:01:46

Title: Auto gearbox issues
Post by: GrayUK on 01 January 2010, 19:01:46

During the recent cold spell, I started my Omega (Y reg. CDX estate 2.2 petrol).
The automatic change position indicator light kept flashing around from D to P to 3 etc and then had all the lights on.
After a while the engine management light came on (not the car with the spanner).
My current situation is that i have had the codes read by a friend of mine.
P1700 and P700 which point to the TCU. Sometimes I have a full gearbox but the light favours the 3 position occasionally flashing around. Other times i only have manual selection of 1, 2 and 3.
I do not believe the is a ‘real’ fault but a sensor problem.
Can anyone help, or just point me in the right direction please.

Many thanks in advance.

Title: Re: Auto gearbox issues
Post by: RobG on 01 January 2010, 19:05:09

Just answered this in "electrical" section!

Title: Re: Auto gearbox issues
Post by: TheBoy on 02 January 2010, 10:28:44

No cross posting.

Locked.