Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: acura on 17 January 2010, 17:24:05
-
Quick question chaps:
On separating the exhaust downpipe from the manifold on a 2.2 is there a bracket that needs to be released to push the exhaust down to clear the studs? If so where is it?
Cheers ;)
-
PM Wellung666. He'll know how it goes :) (After all he's a Master:) )
-
There is a bracket by the flex should be a 13mm headed bolt. Check the lamda cable isnt being steched as well.
Lee
-
There is a bracket by the flex should be a 13mm headed bolt. Check the lamda cable isnt being steched as well.
Lee
Correct :y 2.2 cats have 7 bolts - 4 on the manifold joint, 2 on the join the the centre section and 1 holding it solid to the gearbox crossmember. Then there are the 2 lambda plugs.