Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MickAP on 24 January 2010, 16:19:48

Title: ATF change
Post by: MickAP on 24 January 2010, 16:19:48

What do I need to do a oil change on the auto box.
It's an 03 plate 2.2, never attempted this before.
I have read there are 2 sump gaskets and filter(s) one or two. Do they do a kit for this, and where is the best place to obtain this?
Mentioned on here are Jpat gearbox specialist, do I order from them or is it a dealer part. How much do you reckon for these bits.

Mick ;)

Title: Re: ATF change
Post by: tunnie on 24 January 2010, 16:24:26

£60 for the bits IIC, 2 gaskets, and the filter. You need to drop box sumps, clean out the sump, replace the filter, re-assemble.

Fill it up again with Dex III, you won't be doing a complete fluid change, a lot will still be in the torque converter.

Title: Re: ATF change
Post by: Entwood on 24 January 2010, 16:25:46

I got mine direct from jpat

http://www.jpat.co.uk

I phoned them, discussed what i needed, mentioned I was an ABS member and got discount.

Can't tell you prices as it was the old car and all the paperwwork went with it.

Not done this one yet .. summer job looming .. :)

Title: Re: ATF change
Post by: MickAP on 24 January 2010, 16:58:04

So the gaskets and filter are as the jpat website this link http://www.jpat.co.uk/GM%204L30E%20AR25-35.pdf
It shows the 4L30E ar25/35 gearbox, is that the one I have fitted, it's for the 2.2 auto saloon not the tractor, that's manual box anyway.

Mick ;)

Title: Re: ATF change
Post by: Welung666 on 24 January 2010, 17:27:19

Mick I'm only about an hour from you if you need a hand, I've done a few Auto fluid changes now :y

Title: Re: ATF change
Post by: MickAP on 24 January 2010, 23:05:09

Quote

Mick I'm only about an hour from you if you need a hand, I've done a few Auto fluid changes now :y

May just take you up on that offer :y....I've still got a leaky exhaust joint aswell so will get in touch when you're ready and parts purchased ;)

Mick

Title: Re: ATF change
Post by: feeutfo on 24 January 2010, 23:31:52

Quote

So the gaskets and filter are as the jpat website this link http://www.jpat.co.uk/GM%204L30E%20AR25-35.pdf
It shows the 4L30E ar25/35 gearbox, is that the one I have fitted, it's for the 2.2 auto saloon not the tractor, that's manual box anyway.

Mick ;)

yep thats the one, you can get away with washing out the filter as i did, can also use an instant gaskit type goo of the correct type but i fitted gaskits from the dealer, you can also get dex3 fuchs titan 4000 from any silkolene stocking motor factor, which is cheaper than the dealer stuff, although i'm sure jpat will sort you out. hth