Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: unlucky mark mv6 on 02 February 2010, 12:51:51

Title: rear mv6 spoiler
Post by: unlucky mark mv6 on 02 February 2010, 12:51:51
How are these fixed to the bootlid on a facelift? :-/
Title: Re: rear mv6 spoiler
Post by: tunnie on 02 February 2010, 12:52:44
glue, and lots of it. Try a hair dryer to soften the glue and cheese wire underneath the spoiler to pull it off.
Title: Re: rear mv6 spoiler
Post by: unlucky mark mv6 on 02 February 2010, 13:17:45
Quote
glue, and lots of it. Try a hair dryer to soften the glue and cheese wire underneath the spoiler to pull it off.
Are you saying ill have some trouble down the scrappy then tunnie. ::)
Title: Re: rear mv6 spoiler
Post by: tunnie on 02 February 2010, 14:01:29
Quote
Quote
glue, and lots of it. Try a hair dryer to soften the glue and cheese wire underneath the spoiler to pull it off.
Are you saying ill have some trouble down the scrappy then tunnie. ::)

Yes, might be easier to unbolt the whole boot and take it home, then take your time when removing it, espeically if you want the spoiler in good nick  :y
Title: Re: rear mv6 spoiler
Post by: geoff on 02 February 2010, 15:36:50
usually two screws at each end of the spoiler two like tunnie said better of taking the whole boot lid much easier :y :y :yand i would just spray the lot and change over  :y :y :y :y
Title: Re: rear mv6 spoiler
Post by: Elite Pete on 02 February 2010, 16:19:30
Quote
usually two screws at each end of the spoiler two like tunnie said better of taking the whole boot lid much easier :y :y :yand i would just spray the lot and change over  :y :y :y :y
Not on a facelift one, they're just bonded ;)
Title: Re: rear mv6 spoiler
Post by: geoff on 02 February 2010, 16:22:01
Quote
Quote
usually two screws at each end of the spoiler two like tunnie said better of taking the whole boot lid much easier :y :y :yand i would just spray the lot and change over  :y :y :y :y
Not on a facelift one, they're just bonded ;)
sorry should read his profile ::) ::) ::) ::),still would be easier to change whole boot wouldn't it :y :y :y :y
Title: Re: rear mv6 spoiler
Post by: tunnie on 02 February 2010, 16:39:01
Quote
Quote
Quote
usually two screws at each end of the spoiler two like tunnie said better of taking the whole boot lid much easier :y :y :yand i would just spray the lot and change over  :y :y :y :y
Not on a facelift one, they're just bonded ;)
sorry should read his profile ::) ::) ::) ::),still would be easier to change whole boot wouldn't it :y :y :y :y

Could be expensive re-painting it, i'd take the boot off, take it home and spend time removing the spoiler, rather than rushing it in a scrappy
Title: Re: rear mv6 spoiler
Post by: unlucky mark mv6 on 02 February 2010, 19:27:34
Quote
Quote
Quote
Quote
usually two screws at each end of the spoiler two like tunnie said better of taking the whole boot lid much easier :y :y :yand i would just spray the lot and change over  :y :y :y :y
Not on a facelift one, they're just bonded ;)
sorry should read his profile ::) ::) ::) ::),still would be easier to change whole boot wouldn't it :y :y :y :y

Could be expensive re-painting it, i'd take the boot off, take it home and spend time removing the spoiler, rather than rushing it in a scrappy
Dont need to repaint it,as i only want the spoiler to sell,but also could sell the lid on aswell.