Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: sparten on 02 February 2010, 19:43:44
-
any one know what i need to remove to get the rad out as it's no1 on the agenda tomorrow
-
pair of pliers to remove the two clips on the rad, and pipe clips, then lift out. :y
-
plyers for metal clips, got an auto? need to remove oil cooler pipes, as well as normal cooling pipes
-
I think I removed the multi-rams and fan from behind the rad and unscrewed the A/C condenser on the front.
Was about 7 years ago though so memory a little hazy :-/
-
I think I removed the multi-rams and fan from behind the rad and unscrewed the A/C condenser on the front.
Was about 7 years ago though so memory a little hazy :-/
No need to touch the A/C condensor when replacing/removing the main radiator :y
-
yes it is an auto are those cooler pipes metal from rad then rubber into metal running along driver chassie if so i seen them ,so clip on top/bottem hose,2 cooler pipes and the rad is cliped in you say,do the bag pipes have to come out or will fan have enough room to clear
-
yup A/C is set much further forward, and won't be touched. Wear some thick gloves though, everytime i have taken a rad out, i loose a chunk of skin ;D
-
will do ,and i must type faster 2 replys before answer
-
yes it is an auto are those cooler pipes metal from rad then rubber into metal running along driver chassie if so i seen them ,so clip on top/bottem hose,2 cooler pipes and the rad is cliped in you say,do the bag pipes have to come out or will fan have enough room to clear
No bag pipes can stay, all the bolts / access you need is to the left and right. They won't get in the way
-
christ have i come across a job allmost easy to do on the miggy :o