Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: fcmbobby on 02 February 2010, 18:09:38

Title: Cam cover
Post by: fcmbobby on 02 February 2010, 18:09:38

Hi guys i'm in middle of doing cam cover gaskets but cant seem to remove the wiring loom above the right cam cover. Any ideas or instructions would be very welcome

Title: Re: Cam cover
Post by: tunnie on 02 February 2010, 19:46:34

don't think that can be removed, just has to be held out of the way  :y

Title: Re: Cam cover
Post by: TheBoy on 02 February 2010, 21:03:35

As tunnie says, needs to be held out of the way - either another set of hands, or carefully tied back

Title: Re: Cam cover
Post by: Entwood on 02 February 2010, 21:08:06

I tied mine back to the bonnet support strut with a length of string, on the second attempt :( ... get it as far out of your way as you can.. if you try and work round it you'll probably not seat the half moon on the passenger side. This will result in it leaking and you having to take the whole thing apart again .. :(

been there .. got the T shirt .. :(