Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Edd on 08 February 2010, 21:11:09

Title: cam belt change.
Post by: Edd on 08 February 2010, 21:11:09

Hi everyone.
Is there anyone in essex near lakeside that will be willing to lend me a cam belt kit in the the near future. I have just got the DVD and all seems pretty straight forward. If not could anyone tell me if this kit is any good. It says it does the omega but need to know how good it is.

http://cgi.ebay.co.uk/Cam-shaft-timing-locking-lock-tool-kit-B0AFD_W0QQitemZ110486819103QQcmdZViewItemQQptZUK_Measuring_Tools_Levels?hash=item19b987111f

Thanks in advance

Edd

Title: Re: cam belt change.
Post by: dbug on 08 February 2010, 21:13:06

What motor mate - certainly no good for a V6.

Title: Re: cam belt change.
Post by: dbug on 08 February 2010, 21:14:17

If its a V6 one on ebay here - http://cgi.ebay.co.uk/cam-belt-lock-kit-for-vauxhall-gm-saab_W0QQitemZ300393716822QQcmdZViewItemQQptZUK_Hand_Tools_Equipment?hash=item45f0dc5c56

Title: Re: cam belt change.
Post by: Andy B on 08 February 2010, 21:14:59

Quote

..... If not could anyone tell me if this kit is any good. It says it does the omega but need to know how good it is.

http://cgi.ebay.co.uk/Cam-shaft-timing-locking-lock-tool-kit-B0AFD_W0QQitemZ110486819103QQcmdZViewItemQQptZUK_Measuring_Tools_Levels?hash=item19b987111f

Thanks in advance

Edd

It looks like it has the locking toolss for each cam, but you need the bit that locks the carnk using the water pump as a datum and the 'spectacles' bit to check all 4 cams are timed to each other afterwards.


like dbugs
(http://i.ebayimg.com/04/!BlNsdI!B2k~$(KGrHqQH-DoEs-ZqQDpMBL,wkvC2Iw~~_35.JPG)  ;)  ;)  ;)

Title: Re: cam belt change.
Post by: Edd on 08 February 2010, 21:18:26

i thought so, oh well i will try and bid on that one you show so if i get it then at least i have one in my area for people to use if needed

Title: Re: cam belt change.
Post by: razzo on 09 February 2010, 07:12:29

Quote

Hi everyone.
Is there anyone in essex near lakeside that will be willing to lend me a cam belt kit in the the near future. I have just got the DVD and all seems pretty straight forward. If not could anyone tell me if this kit is any good. It says it does the omega but need to know how good it is.

http://cgi.ebay.co.uk/Cam-shaft-timing-locking-lock-tool-kit-B0AFD_W0QQitemZ110486819103QQcmdZViewItemQQptZUK_Measuring_Tools_Levels?hash=item19b987111f

Thanks in advance

Edd

got a locking kit for a v6 you can borrow if you want & not too far away  :y

Title: Re: cam belt change.
Post by: Edd on 09 February 2010, 21:04:25

hello mate, i would appreciate that, where abouts r u