Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: biggriffin on 12 February 2010, 21:36:44

Title: more codes
Post by: biggriffin on 12 February 2010, 21:36:44

had my 3.0l on the tech 2 today because it wont run again >:(
  came back with these any ideas please?
  p1844 ign/inj cutoff circuit-high input.
  co 244 present throttle posiition sensor input no signal.
  also the tech 2 when trying to use the engine data side kept putting up on the tech 2 "no communication with engine."
 
  any help would be of help to get it going again. :'(

Title: Re: more codes
Post by: Entwood on 12 February 2010, 21:40:03

I doubt you have a "genuine" tech2 ..... so a true description of what you have might help.

A "true" tech2 would set you back well over £3000 ......  :(

Also .. it would have no problems talking to any of the modules at any time ..

Title: Re: more codes
Post by: biggriffin on 12 February 2010, 21:43:31

it was an all singing all dancing GM tech 2.

Title: Re: more codes
Post by: Entwood on 12 February 2010, 21:48:13

Quote

it was an all singing all dancing GM tech 2.

My apologies then .. :(

Seems odd it would not communicate then ... with any luck TB or MarkDTM will pass by shortly .. they might know why .. :(

Title: Re: more codes
Post by: biggriffin on 12 February 2010, 21:54:02

 [smiley=dankk2.gif] need all the help i can get