Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Jim on 12 February 2010, 18:40:47

Title: Omega 3.0 V6 Elite Cutting Out!!!!!!!!!!!
Post by: Jim on 12 February 2010, 18:40:47

Can anyone help or give me a clue,
3 times today the car cut out whilst driving, twice when braking in slow traffic and ones whilst driving about 25-30mph, I had to knock it into neutral quickly (as Auto) and turn the key and the engine would start again,
Any Ideas!!!

Title: Re: Omega 3.0 V6 Elite Cutting Out!!!!!!!!!!!
Post by: albitz on 12 February 2010, 18:52:12

ICV idirty/sticking, or crank sensor. Do paperclip test, a code 19 will indicate crank sensor fubared. :y

Title: Re: Omega 3.0 V6 Elite Cutting Out!!!!!!!!!!!
Post by: sujole on 12 February 2010, 20:21:33

I had the same problem with a 2.5 CD,new crank sensor sorted it.

Title: Re: Omega 3.0 V6 Elite Cutting Out!!!!!!!!!!!
Post by: caran10 on 12 February 2010, 21:56:47

just had the same problem with my 2.6 and it was the maf sensor

Title: Re: Omega 3.0 V6 Elite Cutting Out!!!!!!!!!!!
Post by: Jim on 12 February 2010, 22:08:31

I'II do the paper clip test in the morning, I total forgot about it :)