Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymienets on 22 March 2010, 00:20:59

Title: wing removal
Post by: Raymienets on 22 March 2010, 00:20:59

Is this an easy task on my miggy

Title: Re: wing removal
Post by: Darth Loo-knee on 22 March 2010, 00:23:51

Yeap but there is a bolt hiding inside the wheels arch behind some rubber  ;)

Title: Re: wing removal
Post by: Welung666 on 22 March 2010, 08:29:37

To quote myself from a while back....

Quote

It can be done without taking the front bumper off but it's tight.

2 torx screws attaching the arch liner to the front bumper need to come out, then the arch liner. 3 x 10mm bolts holding the black bumper retainer then the 2 x 10mm bolts behind that. Line of bolts across the top (8 IIRC and all 10mm). Then 2 x 10mm bolts behind the sill cover, 1 x 10mm bolt at the top hinge edge from the door side and 1 x 10mm bolt about halfway up the hinge edge from inside the wheel arch. And it's off