Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: OGCDaz on 28 March 2010, 22:21:59

Title: crankshaft sensor removal 2ltr 16v no AIR con
Post by: OGCDaz on 28 March 2010, 22:21:59

How do i remove it not very gd with cars  :'( :'(
Error Code P0335 Crankshaft sensor error

Title: Re: crankshaft sensor removal 2ltr 16v no AIR con
Post by: Darth Loo-knee on 28 March 2010, 22:27:44

Should be easy enough without the aircon pump there mate.
It is around where the dipstick goes into the block (on the passenger side) one bolt hold the Crank Sensor in place think its an E10 (torx socket) then just a matter of routing the cable in the same position and pulling it in  :y

Title: Re: crankshaft sensor removal 2ltr 16v no AIR con
Post by: OGCDaz on 28 March 2010, 22:36:06

do i go underneath or above m8 ?

Title: Re: crankshaft sensor removal 2ltr 16v no AIR con
Post by: Darth Loo-knee on 28 March 2010, 22:39:21

I personally would go from underneath to undo the torx bolt, then pull out the Crank Sensor. Then go from the top to pull it out and thread the new one whilst doing it so you know where it goes :y