Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Proz on 05 April 2010, 14:59:15

Title: Wheel Fitment
Post by: Proz on 05 April 2010, 14:59:15

Hi
Would 215/55/16's of a 04 Signum with 41 offset fit the omega with no problems .... according to what i can find out they should but i thought i better check with the OOF experts first  :y

Thanks

Title: Re: Wheel Fitment
Post by: RobG on 05 April 2010, 15:07:26

Should be OK. Thought offset on Signum/Vectra C was 35-38 same as the Mig :-/

Title: Re: Wheel Fitment
Post by: Proz on 05 April 2010, 15:13:25

Quote

Should be OK. Thought offset on Signum/Vectra C was 35-38 same as the Mig :-/

Yes i thought that too .... :y

Title: Re: Wheel Fitment
Post by: RobG on 05 April 2010, 15:15:48

http://www.alloyguide.com/Vauxhall.php :y

Title: Re: Wheel Fitment
Post by: Proz on 05 April 2010, 15:19:18

Quote

http://www.alloyguide.com/Vauxhall.php :y

Thanks for the link ..  :y

Title: Re: Wheel Fitment
Post by: Proz on 05 April 2010, 15:52:41

Will the standard bolts i have in mine at the moment be ok as well .... i assume they will be ... mine just has the standard 5 spoke alloy just now so they should be ok ...... but they are begining to look a bit scabby and bubbling in places as well as needing tyres  :-/

Title: Re: Wheel Fitment
Post by: kcl on 06 April 2010, 06:49:21

Bolt pattern is the same, as well as the hole on the rims but offset on Vectra C/Signum is different:
Omega steel 33
Omega alloy 39
Vectra C alloy 41
I tried some Vectra wheels on my car and they seem to sit very "in" in the arches, not sure why because only 2 mm difference in offset. Might be an optical illusion  :y