Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: pd on 09 April 2010, 17:10:30

Title: code CO700
Post by: pd on 09 April 2010, 17:10:30

Anyone help eml came on local garage came back with the code   CO700 petrol omega 2.2cdx 52 plate

Title: Re: code CO700
Post by: PhilRich on 09 April 2010, 17:15:27

Quote

Anyone help eml came on local garage came back with the code   CO700 petrol omega 2.2cdx 52 plate

No such code as CO700 AFAIK? :-?

The nearest I can find are these two:-
P0700 MIL request from Transmission Control (TC) Modul
P0700 EOBD Error stored by Transmission Control (TC) Modul

Don't know what exactly they mean, but someone more knowledgeable should be along sooner or later  :y

Title: Re: code CO700
Post by: Welung666 on 09 April 2010, 17:54:03

Did it drop into limp home mode? I.E. stuck in 3rd and really low revving?

Title: Re: code CO700
Post by: pd on 09 April 2010, 18:09:33

no didn't go into limp home mode went through all gears took ages to go from 1st to 2nd when i pressed accelerator pedal not smooth juddery

Title: Re: code CO700
Post by: TheBoy on 09 April 2010, 18:50:00

Any codes in tcm or abs? What reader used? Some ignore 0340

Title: Re: code CO700
Post by: pd on 09 April 2010, 19:48:31

the code reader was  mac tools  guy at the garage said it came up  with the code CO700 but he was unable to tell me what the code referred to. I would go  to the local arnold clarke vauxhall dealership but have lost faith in them over past problems. Any help would be greatfully accepted

Title: Re: code CO700
Post by: Marks DTM Calib on 09 April 2010, 21:16:34

Hmmmm....any difficulty starting recently?

Title: Re: code CO700
Post by: pd on 10 April 2010, 11:09:30

yes it has been getting worse over the last week ok when warm but a pig to start  when cold.    Any ideas

Title: Re: code CO700
Post by: Proz on 10 April 2010, 11:19:09

P0700 MIL request from Transmission Control (TC) Modul

I had this code when my cam sensor went  :-/