Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: MARK020 on 17 April 2010, 17:15:32
		
			
			- 
				Hi All,
 
 My engine electronics warning lamp now stays on, I've read the hand book and it says little apart from there's a problem with the engines electronics and get it checked out by a Vx dealer.
 
 I've gone through the pages on this forum and I can't find any info about this.
 
 Does anyone have any ideas as to what it could be and how to test/check to maybe narrow down what the fault could be.
 
 Any ideas appreciated.
 
 Many thanks
 
 Mark
- 
				You need a paperclip:
 
 http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
 
 :)
- 
				Thanks, I'll try that.
			
- 
				Hi, 
 
 I've done the paperclip test on my 2.0 16v and get the codes
 
 0130 and 0135.
 
 Can someone please tell me what they mean 'cos I can't find the codes for this particular engine.
 
 Thank you.
- 
				Now you want to go here:
 
 http://www.omegaowners.com/forum/YaBB.pl?num=1206569945
 
 Looks like you might have a wiring problem to, or problem with the lambda sensor in the exhaust.
 Check the wiring carefully before anything else.
- 
				Hi, 
 
 I've done the paperclip test on my 2.0 16v and get the codes
 
 0130 and 0135.
 
 Can someone please tell me what they mean 'cos I can't find the codes for this particular engine.
 
 Thank you.
 
 
 
 
 I believe these codes are for your vehicle, but i,m afraid I can't elaborate on their meaning :-[. Someone more knowledgeable will probably be along shortly though  :y :y
 
 P0130 O2 Sensor 1 Circuit Voltage High
 P0130 O2 Sensor 1 Circuit Voltage Low
 P0130 O2 Sensor 1 Open Circuit
 P0130 O2 Sensor 1 Incorrect Signal
 P0135 O2 Sensor 1 Heater Voltage High
 P0135 O2 Sensor 1 Heater Voltage Low
 P0135 O2 Sensor 1 Heater Open Circuit
- 
				Thank you all for your replies, that'll give me some thing to go on, it'll keep me busy tomorrow. ;D