Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Tony H on 30 December 2007, 12:11:35
-
Hello everyone can anybody post up a piccy of the route of the aux belt on a v6?
Cheers :y
-
Like my diagram?
(http://i89.photobucket.com/albums/k205/jamesv6cdx/ab.jpg)
-
Nice work James ;D
-
Nice work James ;D
Art was never my strong point ;D ;D
-
Could you label the pullys? ;D
-
I have seen a proper diagram on the forum for the route of the aux belt, but cant find it....
Oh James looks like you drawing was done with your left hand mate ;D
-
Thanks James that'll do me :y
-
** EDITED **
Anyone interested in the drawing please PM me
-
Aye, you can all take the michael... but it does show the correct belt route ;D ;D ;D :P
-
Aye, you can all take the michael... but it does show the correct belt route ;D ;D ;D :P
..that it does.
-
We could do with that picture in Maintence :y
-
We could do with that picture in Maintence :y
It's going to come-off... not ours so to speak... just waited for everyone to see it before removing it... but if someone could copy it on to a new drawing this would be helpful... or better still use James' drawing for the maintenance guides section...
-
We could do with that picture in Maintence :y
It's going to come-off... not ours so to speak... just waited for everyone to see it before removing it... but if someone could copy it on to a new drawing this would be helpful... or better still use James' drawing for the maintenance guides section...
:y :y :y
-
We could do with that picture in Maintence :y
It's going to come-off... not ours so to speak... just waited for everyone to see it before removing it... but if someone could copy it on to a new drawing this would be helpful... or better still use James' drawing for the maintenance guides section...
:y :y :y
I'll tell you what - I'll improve it a little first ::) - and post it up later on :y
-
We could do with that picture in Maintence :y
It's going to come-off... not ours so to speak... just waited for everyone to see it before removing it... but if someone could copy it on to a new drawing this would be helpful... or better still use James' drawing for the maintenance guides section...
Ok well I have saved the picture :y
I have seen a picture like it on here before
-
I to have saved the picture...........but what to do with it know :-/
-
Aux belt tensioner and new belt job done :y The old tensioner bearing had seized and the plastic pully sufferd total meltdown! :o
Its times like this I wish I had hands like Tunnie, not like two bunches of bananas! My hands and forearms look like iv'e had a fight with a mountain lion :(
Thanks once again for the drawings lads :y
-
G - ????
T - Tensioner??
-
G is the guide pulley, only fitted to very early engines, and later done away with by means of rerouting the belt...