Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Martin_1962 on 25 April 2010, 12:46:02

Title: Facelift rear bumper removal
Post by: Martin_1962 on 25 April 2010, 12:46:02

I need to whip off my bumper, spare wheel is out, rear plastic panel is out.

What do I need to remove please?

I am rewiring my towbar and the cable is too thick to push through the existing route.

Thanks

Martin

Title: Re: Facelift rear bumper removal
Post by: Lazydocker on 25 April 2010, 13:20:14

Screw in side the edge of the wheelarch (through the liner), about 4 screws across the top edge of the bumper (would be under the closed boot lid) and a couple of push pins underneath IIRCC :y

Title: Re: Facelift rear bumper removal
Post by: Grrrrrr on 25 April 2010, 13:22:09

Are you sure the cable won't push through with a little "encouragement"? Mine did!

Fairly liquid might help it slip through too.

J

Title: Re: Facelift rear bumper removal
Post by: Martin_1962 on 25 April 2010, 14:15:36

Did it from underneath after drilling one size bigger