Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: satch on 02 May 2010, 15:38:06

Title: Big-end bearing failure
Post by: satch on 02 May 2010, 15:38:06

Can anyone tell me how much it would cost to replace the big-end bearing on my omega b please. Is there anything else that might cause the same racket?

Title: Re: Big-end bearing failure
Post by: KW on 02 May 2010, 16:28:42

If the ends are gone then it's odds on (depending on how long the car was run with shagged ends) that the crank is gonna need a regrind as well, cheaper to buy a known good engine.