Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Raymond on 07 May 2010, 20:36:30

Title: 6 spoke Elite wheels
Post by: Raymond on 07 May 2010, 20:36:30

Can anyone tell me the width of the 6 spoke Elite wheels fitted to the later models?

Thanks

Raymond

Title: Re: 6 spoke Elite wheels
Post by: feeutfo on 07 May 2010, 21:05:18

standard tyre size 235 45 17, if that helps at all?

Title: Re: 6 spoke Elite wheels
Post by: Raymond on 07 May 2010, 21:07:50

Thanks Chris, I have these wheels and thats the tyre size I have, I was just wondering how wide they are and the offset if anyone knows.

Title: Re: 6 spoke Elite wheels
Post by: 2woody on 07 May 2010, 21:59:14

it says on the wheel, probably on the back - take one off and have a look.

expect something like 7Jx16 ET35

"7" is width in inches
"J" is the rim design
"16" is the nominal size
"ET" is I believe German for offset
"35" is the offset in mm

Title: Re: 6 spoke Elite wheels
Post by: Andy B on 07 May 2010, 22:00:48

Quote

it says on the wheel, probably on the back - take one off and have a look.

expect something like 7Jx16 ET35

"7" is width in inches
"J" is the rim design
"16" is the nominal size
"ET" is I believe German for offset
"35" is the offset in mm

the off set is under the centre cap on the 16" Elite alloys  :-/

Title: Re: 6 spoke Elite wheels
Post by: SJKOO01 on 08 May 2010, 12:26:30

Are you after that set that's on ebay by any chance, with you asking about the six spoke design ??  ::)

Title: Re: 6 spoke Elite wheels
Post by: Raymond on 09 May 2010, 15:05:13

Smegmatt, no I have these wheels but I am looking at replacing them, just wanting to know the width and offset so I don't get wheels that sit further into the arches.

Title: Re: 6 spoke Elite wheels
Post by: Raymond on 09 May 2010, 15:08:33

http://www.motorsportworld.co.uk/images/wheels/large/H_431.jpg

This is the wheels I am thinking about