Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Anthony on 05 June 2010, 23:30:45

Title: HT Leads
Post by: Anthony on 05 June 2010, 23:30:45

Hello everyone,

sorry i havent posted for a while been very busy with work...

I have a problem with the miggy, one of the ht leads has broken, and i am more than 300 miles from home on our hols. Are the HT Leads easy to change on a N plate 3.0 Elite???

I have no tools and not alot of spare money to take it to a garage, hopefully i should be able to do this but don't really know where to start.

Thanks in advance

Anthony

Title: Re: HT Leads
Post by: tunnie on 05 June 2010, 23:33:03

might be worth posting where you are? Someone near you might be able to help  :y

Its straight forward, if a little fiddly, unplug at the plug and again at the DIS pack

Title: Re: HT Leads
Post by: Anthony on 05 June 2010, 23:36:22

thanks for the quick reply, i am in Tunbridge wells at the moment but am hopefully heading home to cornwall tomorrow.

Is the DIS pack quite easy to get to?

Title: Re: HT Leads
Post by: albitz on 05 June 2010, 23:39:02

No, its a pita and it depends on the size of your hands and forearms.Its not impossible or technically difficult though.In case you dont know where it is its at the back of the engine underneath the bottom of the windscreen on the passenger side. :y

Title: Re: HT Leads
Post by: tunnie on 05 June 2010, 23:41:14

Depends how big your hands are  ;D

Easier with scuttle off but guessing you don't have many tools to hand, its directly behind the engine block. I can just about reach it, but i have small hands / skinny arms

Title: Re: HT Leads
Post by: RobG on 05 June 2010, 23:43:13

Quote

Depends how big your hands are  ;D

Easier with scuttle off but guessing you don't have many tools to hand, its directly behind the engine block. I can just about reach it, but i have small hands / skinny arms

And a 4-pot. (count the fingers)(http://www.easyfreesmileys.com/smileys/free-happy-smileys-349.gif) (http://www.easyfreesmileys.com/Free-Jumping-Smileys/)

Title: Re: HT Leads
Post by: tunnie on 05 June 2010, 23:48:08

Quote

Quote

Depends how big your hands are  ;D

Easier with scuttle off but guessing you don't have many tools to hand, its directly behind the engine block. I can just about reach it, but i have small hands / skinny arms

And a 4-pot. (count the fingers)(http://www.easyfreesmileys.com/smileys/free-happy-smileys-349.gif) (http://www.easyfreesmileys.com/Free-Jumping-Smileys/)

No DIS pack on mine  :P

I am usually called upon when a well known admin who is rather large  ::) Needs gadget hands...

I bodged a Senator HT lead on TB's dead 2.5, while we were testing it. Think that had the scuttle off

Title: Re: HT Leads
Post by: RobG on 05 June 2010, 23:52:57

Quote

Quote

Quote

Depends how big your hands are  ;D

Easier with scuttle off but guessing you don't have many tools to hand, its directly behind the engine block. I can just about reach it, but i have small hands / skinny arms

And a 4-pot. (count the fingers)(http://www.easyfreesmileys.com/smileys/free-happy-smileys-349.gif) (http://www.easyfreesmileys.com/Free-Jumping-Smileys/)

No DIS pack on mine  :P

I am usually called upon when a well known admin who is rather large ::) Needs gadget hands...

I bodged a Senator HT lead on TB's dead 2.5, while we were testing it. Think that had the scuttle off

Thought Jamie was a fine figure of a boy man(http://www.easyfreesmileys.com/smileys/free-cute-smileys-300.gif) (http://www.easyfreesmileys.com/Free-Evil-Grin-Smileys/)

Title: Re: HT Leads
Post by: Andy B on 05 June 2010, 23:55:17

Quote

....
Thought Jamie was a fine figure of a boy man(http://www.easyfreesmileys.com/smileys/free-cute-smileys-300.gif) (http://www.easyfreesmileys.com/Free-Evil-Grin-Smileys/)

He is, it just depends how you define 'fine'  ::)  ::)  ::)