Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: Shrek on 07 June 2010, 17:45:44
		
			
			- 
				I recently got some GM rear brake pads on a well known auction site .
 They are part number 9193476 which i now understand means they are heavy duty pads .
 Does this matter ?  I'm planning on doing the discs as well at the time so is there any preference on disc make as i see rear discs arn't on trade club.
 I have looked at the guide on rear disc service , however in my box there are 2 metal shims so where do these fit.. ie shim to piston and also which way do the pins go through or does it matter ?
 Pins have a collar below the "head"
 I realise i will probly find out these questions when i come to do the job but i like to have no suprises  ;D
 Thanks  :y
- 
				 ....
 so is there any preference on disc make as i see rear discs arn't on trade club. .....
 
 Says who?  ;)  ;)  ;)
 
 Omega Part Number Retail Price Normal Trade Trade Club
 Brake discs/drums, rear
 Solid discs/drums to '00                               90444513 £94.00 £79.96 £65.81
 
 
 Ventilated discs/drums from '01                              93182287 £94.00 £80.15 £68.05
 
 
 The pins go from the inside of the caliper, you can't fit them wrong. Removal requires a pin punch around 1/8" dia, you knock the pins through from the outer side. Not sure about the shims if there are only 2, cos there's 2 pistons per caliper, so one piston would lose out where ever you fitted them  ;)
- 
				Mmm i had a look on the site and it listed the front disc set but i couldnt find the rear .
 Thats handy though , Thanks for the part number  :y
- 
				Mmm i had a look on the site and it listed the front disc set but i couldnt find the rear .
 Thats handy though , Thanks for the part number  :y
 
 confusingly, if you look at the rear axle set on the TC page, it then says no matches found  :-?  :-?  :-?
 
- 
				Mmm i had a look on the site and it listed the front disc set but i couldnt find the rear .
 Thats handy though , Thanks for the part number  :y
 
 confusingly, if you look at the rear axle set on the TC page, it then says no matches found  :-?  :-?  :-?
 
 
 Yes thats what i found as well  :-/
- 
				 ....
 Pins have a collar below the "head"  .....
 
 Like these? .......  ;)
 
 (https://www.autocatplus.co.uk/acweb/images/018/97200_0204_9_1.jpg)
 
 http://www.buypartsby.co.uk/brake-fitting-kits-buy.php
- 
				 ....
 Pins have a collar below the "head"  .....
 
 Like these? .......  ;)
 
 (https://www.autocatplus.co.uk/acweb/images/018/97200_0204_9_1.jpg)
 
 http://www.buypartsby.co.uk/brake-fitting-kits-buy.php
 
 Yes thats the very ones .
 
 Mmm i wonder why there are these 2 thin metal shim things as well then  :-/
- 
				 .....
 
 Mmm i wonder why there are these 2 thin metal shim things as well then  :-/
 
 They locate under the pins & press on top of the pads to stop them rattling about in th caliper.  :y :y
- 
				Oopps i just went into the box again and found the other two thin shims wrapped up in amoungst the information sheet thing  :-[ :-[... i feel like a tube now  :-X  so i have four metal shims after all  :y
			
- 
				Found the other two  :-[ :-[ ;D (http://i509.photobucket.com/albums/s337/Prozmonkey/IMG_0008.jpg)