Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mr ICE man on 08 June 2010, 20:43:07

Title: Wheel fitment
Post by: mr ICE man on 08 June 2010, 20:43:07

Hi all will 5 stud Pcd112 alloys fit my mig? ;)

Title: Re: Wheel fitment
Post by: pedroMV6 on 08 June 2010, 21:15:34

Not easily - the Omega is 5x110.

Title: Re: Wheel fitment
Post by: Agemo on 08 June 2010, 23:50:15

Will be close, but even if the PCD is near enough, the bore could still be wrong. You also need to be checking the offset.

Title: Re: Wheel fitment
Post by: Mr Stud on 09 June 2010, 00:05:08

take it that wheels off a mercedes....they will fit with wobbly bolts...merc offset usually around et38 and bore is 66....

Title: Re: Wheel fitment
Post by: kennny on 10 May 2012, 21:04:44

Sorry to hijack but would 5x112 with a ET32 offset fit? Audi/vw wheels? Theres loads more variety than 5x110.

Title: Re: Wheel fitment
Post by: Brikhead on 10 May 2012, 21:14:14

Quote from: Mr Stud on 09 June 2010, 00:05:08

take it that wheels off a mercedes....they will fit with wobbly bolts...merc offset usually around et38 and bore is 66....

I think new style Vx. wheels (Insignia, latest Astra etc.) are 112x5.

Title: Re: Wheel fitment
Post by: GmasterT on 10 May 2012, 21:49:50

New Vx are 5x120 a la monaro :)

5x112 should go with wobble bolts, that looks like my current plan, but as stated correct fit is 5x100

As for offsets, depends on widths etc and what look you want vs arch mods :)