Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gav mv6 on 09 June 2010, 19:59:39

Title: mv6 cambelts due
Post by: gav mv6 on 09 June 2010, 19:59:39

shes due in 600 miles and im worried !!! , any advice greatly recieved , where best place to get the complete kit , what else do i need and how long will it take me , or is there anyone who can do it a reasonable rate ?

many thanks

gavin

Title: Re: mv6 cambelts due
Post by: Entwood on 09 June 2010, 20:04:49

You'll need the DVD, the CORRECT setting tools, and the full kit and about 4-6 hours if you've never done one.

Or, depending on your location (stick it in your profile .... saves being asked a zillion times  :)  ) there are folks on here who do them.

Elite Pete and Darth Loo Knee are 2 that come to mind

HTH

Pete = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=7950554859636C5948593C0

Daz = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=4764642660656E6E0B0

Title: Re: mv6 cambelts due
Post by: gav mv6 on 09 June 2010, 20:12:19

Quote

You'll need the DVD, the CORRECT setting tools, and the full kit and about 4-6 hours if you've never done one.

Or, depending on your location (stick it in your profile .... saves being asked a zillion times  :)  ) there are folks on here who do them.

Elite Pete and Darth Loo Knee are 2 that come to mind

HTH

Pete = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=7950554859636C5948593C0

Daz = http://www.omegaowners.com/forum/YaBB.pl?action=viewprofile;username=4764642660656E6E0B0

how much is dvd , the tools , and kit ?
im in leicester
travel to corby every day
thanks

Title: Re: mv6 cambelts due
Post by: tunnie on 09 June 2010, 20:22:14

£3 for the DVD, locking kit you will need to borrow, what tools do you have?

Title: Re: mv6 cambelts due
Post by: gav mv6 on 09 June 2010, 20:28:48

Quote

£3 for the DVD, locking kit you will need to borrow, what tools do you have?

im fine with the tools mate , just never done a 24valver before .

Title: Re: mv6 cambelts due
Post by: Andy B on 09 June 2010, 20:33:22

Quote

...
im fine with the tools mate , ....

Easy enough then  ;) you need the locking kit otherwise it's just best  guess & a 30mm offset ring spanner for the eccentric adjusters.

Title: Re: mv6 cambelts due
Post by: albitz on 09 June 2010, 20:58:58

Or you could get the wandering mechanic (Darth Loo-knee)to do it while you watch and learn for next time. You may have to suffer his renditions of Prick Ghastly songs as he works though :y :D