Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Psychoca on 12 June 2010, 12:40:17
-
I have just replace the leak off hose and discovered bubbles seaping from the base of Injector 2 (between block and injector)...
I was wondering how straight forward replacing the seals are? I presume it is a case of removing the HP Pipes, leak off pipes, etc. removing injector, clean threads, replace seal, return injector in place, etc... (Being very careful around Injector 4)...
Is there a specific socket I need to use, or can I just use a long socket???
-
I have just replace the leak off hose and discovered bubbles seaping from the base of Injector 2 (between block and injector)...
I was wondering how straight forward replacing the seals are? I presume it is a case of removing the HP Pipes, leak off pipes, etc. removing injector, clean threads, replace seal, return injector in place, etc... (Being very careful around Injector 4)...
Is there a specific socket I need to use, or can I just use a long socket???
heres how the injector looks stripped and what tools are required
http://www.omegaowners.com/forum/YaBB.pl?num=1264711544
I forgot to say the body has no seals only the copper washer at the base.
dead easy job to take out just like removing a sparkplug :y