Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: same #same# on 12 June 2010, 08:36:04

Title: rear drivrs seat plastic
Post by: same #same# on 12 June 2010, 08:36:04

how do you take it off as the adjuster has come off and just spins round doing nothing, has to one top and one at bottom, cannot see any screws etc thanks,

Title: Re: rear drivrs seat plastic
Post by: I_want_an_Omega on 12 June 2010, 10:41:14

Plastic WHAT exactly?

Title: Re: rear drivrs seat plastic
Post by: same #same# on 12 June 2010, 11:24:08

Quote

Plastic WHAT exactly?

the plastic cover on rear off seat onewith the pocket.

Title: Re: rear drivrs seat plastic
Post by: maximoke on 12 June 2010, 11:33:59

Mines a mini facelift (2000 year) but on mine there are two screws at the bottom just where it starts to curl underneath a bit - they are right at the outside edges, unscrew these and then (mine) just drops down as the top is held with plastic hooks that are part of the backing.  Hope this helps.  Obviously it is better to wind the seat fully forward, but I guess you cant as it's this thats broken.  Push the seat forward though to give you more room sitting behind.  Hope this helps.  Remember mine is a mini facelift model.

Title: Re: rear drivrs seat plastic
Post by: same #same# on 12 June 2010, 11:39:06

thanks can see the screws but the side covers are in way are they cliped in or somthing else thanks

Title: Re: rear drivrs seat plastic
Post by: same #same# on 13 June 2010, 06:57:01

I have taken it off, found the clear plastic huck had snaped off, so had to drill to holes in what was left and put 2 screws in to hold in place so now the back rest is working now, so job done, also found that the passenger seat relise was stuck so fixed that to, all in all a good day :y