Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: rallyraiduk on 11 June 2010, 01:16:47
-
anyone know about upgrading the chip in the ecu ? 1999 m51 engine omega x25dt.
removed immobiliser in ecu at last !!! :y now want it to go faster and these dont do obd2 :-/ for upgrades for power.
check out our beast here...http://www.youtube.com/user/DrSynfeef#p/u
-
you will need the 10 digit figure from the ecu then a chip can be suplied from mild to aggressive accompanied by fair bit of black smoke, shouldnt think that would bother you though in that beast!! :y
-
hope you have a manual, chip it, and that autobox won't last long!
-
They do make good tractors! ;)
-
They do make good tractors! ;)
Oooo - Arrrrr! ;D
-
hope you have a manual, chip it, and that autobox won't last long!
its hooked up to a landrover r380 manual :y had to buy a p38 rangy clutch, dual mass fly wheel and get the props cut down :D
ecu number is 0 281 001 427
-
hope you have a manual, chip it, and that autobox won't last long!
its hooked up to a landrover r380 manual :y had to buy a p38 rangy clutch, dual mass fly wheel and get the props cut down :D
ecu number is 0 281 001 427
The 427 offers more scope than many of the other ECUs. The guy I know charges £70 delivered for a chip. You may get something cheaper from ebay etc, but I know this guy has supplied chips to many members here, with high satisfaction results.
I had one off him when I had my 2.5TD (428 ECU, not so much choice on maps).
-
hope you have a manual, chip it, and that autobox won't last long!
its hooked up to a landrover r380 manual :y had to buy a p38 rangy clutch, dual mass fly wheel and get the props cut down :D
ecu number is 0 281 001 427
PM sent :y
Mick
-
hope you have a manual, chip it, and that autobox won't last long!
its hooked up to a landrover r380 manual :y had to buy a p38 rangy clutch, dual mass fly wheel and get the props cut down :D
ecu number is 0 281 001 427
PM sent :y
Mick
wondered when you would dive in!!! lolol
-
got the chip fitted !!!
smokes a bit....then we tested it
shot up the road in 1st gear, maxed the throttle and then it kicked, ran like a bag of spanners with WHITE SMOKE
turned it off and restarted....runs sweet....ideas?
-
oversped the engine :y
-
over revved and thrown into limpmode you mean ? does this chip have no limiter ?
-
anyone know what code 00140 means? the snapon machine just says its undocumented :-[
-
anyone know what this chip adds to the bhp and torque?
where is theboy?
-
anyone know what this chip adds to the bhp and torque?
where is theboy?
its takes it up to the BMW spec can't mind bhp sorry :-/