Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: andy1965 on 18 June 2010, 14:39:15

Title: wipers
Post by: andy1965 on 18 June 2010, 14:39:15

hi all just drove through some heavy showers now when i switch off wipers they stay in the vetical position blocking my vision. any ideas please >:(

Title: Re: wipers
Post by: amba on 18 June 2010, 17:00:25

Linkage has either come adfrift under scuttle panel or both wiper arms are loose on the spindles.
Remove wiper arms and see if the spindles are moving .

Title: Re: wipers
Post by: feeutfo on 18 June 2010, 19:06:51

That will be the nut loose on the wiper motor, scuttle off,loosen nut further, lift the kinked arm off a little, reposition wipers with kinked arm between arrows on casting, tighten nut, re fit scuttle.

Title: Re: wipers
Post by: andy1965 on 18 June 2010, 19:43:43

thanks will try that. wipers are working fine but stop in wrong position.

Title: Re: wipers
Post by: andy1965 on 18 June 2010, 23:47:41

Quote

That will be the nut loose on the wiper motor, scuttle off,loosen nut further, lift the kinked arm off a little, reposition wipers with kinked arm between arrows on casting, tighten nut, re fit scuttle.

thank you just as you said nut was loose. :y

Title: Re: wipers
Post by: feeutfo on 19 June 2010, 00:53:04

Quote

Quote

That will be the nut loose on the wiper motor, scuttle off,loosen nut further, lift the kinked arm off a little, reposition wipers with kinked arm between arrows on casting, tighten nut, re fit scuttle.

thank you just as you said nut was loose. :y

We both have the t shirt :y