Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: TheBoy on 28 September 2006, 21:46:14
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
-
Wish I had know about this I would have nipped down [smiley=thumbsup.gif]
-
Where at?
-
Where at?
Bo Bo's place...
-
Where at?
Coventry
-
Did I read in one of the many threads that breathers were being done? If so, has someone got a load of carb cleaner?
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
Me too, and nothing else is gonna go wrong between now and then cause the meega is staying in the garage and its not coming out to play until saturday :)
-
Would like to come but at work sat and it's a bit far away :'( soo i'll ave 2 give it a miss but good luck
-
Careful, this could turn into a not-so-mini cambelt party ;)
-
Did I read in one of the many threads that breathers were being done? If so, has someone got a load of carb cleaner?
I'll get some tomorrow ;)
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
-
Did I read in one of the many threads that breathers were being done? If so, has someone got a load of carb cleaner?
I'll get some tomorrow ;)
Try local motor shop, normally around £2 for large aerosol. £10 from Halfrauds....
Will need probably a couple of cans per car, depending how bad they are....
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
If you come to this one, Mark could bring his tin snips....ouch!
-
Did I read in one of the many threads that breathers were being done? If so, has someone got a load of carb cleaner?
I'll get some tomorrow ;)
Me too
-
Did I read in one of the many threads that breathers were being done? If so, has someone got a load of carb cleaner?
I'll get some tomorrow ;)
Try local motor shop, normally around £2 for large aerosol. £10 from Halfrauds....
Will need probably a couple of cans per car, depending how bad they are....
Will do, eventually got my belt from one today, they were really helpful, stealers didn't want to know :-/
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
If you come to this one, Mark could bring his tin snips....ouch!
No danger, i'm eh....washing my hair, that's it. ;D
Anyway, Marks on my side. :P
-
Does this mean that you guys want o-rings, or should we make a run Sat morning since TB has the trade club card?
-
Does this mean that you guys want o-rings, or should we make a run Sat morning since TB has the trade club card?
Not a TC item, so no extra discount (usually get at std trade, which you can normally blag without a card)...
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
If you come to this one, Mark could bring his tin snips....ouch!
I think removal by Omega would be more apt, maybe a door or bonnet perhaps :'(
-
Does this mean that you guys want o-rings, or should we make a run Sat morning since TB has the trade club card?
Suits me, there's 2 dealers in Cov, unless anything has changed since i moved , so getting them on Sat shuold be easy enough
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
If you come to this one, Mark could bring his tin snips....ouch!
I think removal by Omega would be more apt, maybe a door or bonnet perhaps :'(
I thought that the most fitting way, since it was the a/c, would be to lay it on the a/c pulley and start the engine. ;)
-
Did I read in one of the many threads that breathers were being done? If so, has someone got a load of carb cleaner?
I'll get some tomorrow ;)
Try local motor shop, normally around £2 for large aerosol. £10 from Halfrauds....
Will need probably a couple of cans per car, depending how bad they are....
Bo Bo, do u have any kitty litter? Sounds like we'll be making a big mess.
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
If you come to this one, Mark could bring his tin snips....ouch!
I think removal by Omega would be more apt, maybe a door or bonnet perhaps :'(
I thought that the most fitting way, since it was the a/c, would be to lay it on the a/c pulley and start the engine. ;)
And the only way to be 100% sure it would start...
Change the crankshaft sensor beforehand. ;)
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
If you come to this one, Mark could bring his tin snips....ouch!
I think removal by Omega would be more apt, maybe a door or bonnet perhaps :'(
I thought that the most fitting way, since it was the a/c, would be to lay it on the a/c pulley and start the engine. ;)
And the only way to be 100% sure it would start...
Change the crankshaft sensor beforehand. ;)
Make a sentence out of these words Kev.... At....Straws.......Clutching ;D ;D
-
Did I read in one of the many threads that breathers were being done? If so, has someone got a load of carb cleaner?
I'll get some tomorrow ;)
Try local motor shop, normally around £2 for large aerosol. £10 from Halfrauds....
Will need probably a couple of cans per car, depending how bad they are....
Bo Bo, do u have any kitty litter? Sounds like we'll be making a big mess.
We can clean the breathers in the entry/jetty/alley or whatever you all call it. no-one will notice!!
-
Make a sentence out of these words Kev.... At....Straws.......Clutching ;D ;D
Eh...
Clutching at Kevs Baws.
Is that close? ::)
-
Bo Bo, can you pm me the street and cross street pls? Apparently I still haven't figured out how to enter the current location into the sat-nav. >:(
-
Bo Bo, can you pm me the street and cross street pls? Apparently I still haven't figured out how to enter the current location into the sat-nav. >:(
Will do, by cross st I guess you mean where you turned left from my place
-
yeah, sat nav doesn't do street numbers
-
yeah, sat nav doesn't do street numbers
Just listen for the shouting and swearing, that'll be us :D
-
yeah, sat nav doesn't do street numbers
We'll be round the back, I'll leave the security gate unlocked
-
Anything else I/We need to get?
-
Anything else I/We need to get?
[smiley=beer.gif] [smiley=beer.gif] [smiley=beer.gif] ;)
-
Not quite the mega party at Marks_DTM earlier this year (that was 7 cambelts on a cold February day), but we're doing a couple of cambelts round Bo Bo's place on Saturday.
Looking forward to it [smiley=thumbsup.gif]
We need to have one of these up here, either that or the Scottish contingent can hit nottingham in a convoy. That would be cool. 8-)
That would be cool, especially if I could join in!
Can we expect any more dvds? Or would that be too risky............?? [smiley=beer.gif] [smiley=cheesy.gif]
-
Anything else I/We need to get?
Bring whatever tools you have just in case & perhaps a prayer mat! :D
-
Pm me the address.....might be able to get a a few hours out on Saturday......sat in Coventry at the moment at New Century Park
-
Anything else I/We need to get?
Umbrellas? :'(
Mark, pm sent w/ address.
-
Pm me the address.....might be able to get a a few hours out on Saturday......sat in Coventry at the moment at New Century Park
PM sent, been trying to think which one is New Century Park, think it's the one near Warwick University?
Where Marconi is?
-
Sorry if i repeat things that have already been posted but im playing a bit of catch up. Got carb cleaner, Brandish have 3 sets of O rings in stock if we still need to get them. Rang the hire place and they have some canoes, cause i think we're gonna need them too :D
-
I've just got to remember to:
- Get up
- Bring some tools
- Bring laptop
-
I've just got to remember to:
- Get up
- Bring some tools
- Bring laptop
Dont forget your paddle ;)
Edit:- And Sammy
-
Sorry if i repeat things that have already been posted but im playing a bit of catch up. Got carb cleaner, Brandish have 3 sets of O rings in stock if we still need to get them. Rang the hire place and they have some canoes, cause i think we're gonna need them too :D
PM sent
-
Sorry if i repeat things that have already been posted but im playing a bit of catch up. Got carb cleaner, Brandish have 3 sets of O rings in stock if we still need to get them. Rang the hire place and they have some canoes, cause i think we're gonna need them too :D
PM sent
Likewise
-
I've just got to remember to:
- Get up
- Bring some tools
- Bring laptop
Yeah, I've got to get up by 3:30 :(
Better pack laptop, rain gear, etc. 2nite.
When u thinking of bein' there TB?
-
Not long finished work now, so by time I've had a few tonight, I suspect it will be late before I go to bed. I reckon 9:30am is realistic...
-
I've just got to remember to:
- Get up
- Bring some tools
- Bring laptop
Yeah, I've got to get up by 3:30 :(
Better pack laptop, rain gear, etc. 2nite.
When u thinking of bein' there TB?
The BBC forecast is actually pretty good & of course their always right :D
-
Not long finished work now, so by time I've had a few tonight, I suspect it will be late before I go to bed. I reckon 9:30am is realistic...
I expect to be there about then as well.
-
How did it go today, Jaime?
-
Some piccies of todays events...
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1536-1.jpg)
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1537.jpg)
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1542.jpg)
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1543.jpg)
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1538.jpg)
-
few more...
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1544.jpg)
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1545.jpg)
-
Good job we didn't start this car... ;)
(http://i14.photobucket.com/albums/a319/IamTheBoy/Mini%20Cambelt%20Party/IMG_1541.jpg)
-
You all look as though you enjoyed yourselves, so thats good [smiley=thumbsup.gif]. Bet your knackered now though.
-
We achieved 2 cambelts, and a set of cam gaskets today.
I'm sure that Bo Bo and Timbuk will now agree that a cambelt is not as scary as it seems. With the exception of Timbuk shearing a water pump pulley bolt during refitting, no dramas today. The cam cover gaskets went well, with the passenger one being tedious as normal.
All in all a great day, and I thoroughly recommend that any members considering holding some kind of maintenence day go ahead and do it - it really is a good day, a laugh is had, and much is achieved.
Plus a big thanks to Marks_DTM, yet again, for helping out with a query we had regarding cambelt kits...
-
Oh, and the bacon butties were bloody excellent :)
-
I wish I'd come down. Could've brought a knock sensor with me and got some guidance. I probably would have been able to do it with the knowledge that if I f****d up, help was at hand. Never mind.
-
Any chance of putting some names to faces, that would be good cos i've never actually met any of you guys yet. [smiley=thumbsup.gif]
-
Did any take some Radox I bet there were a few stiff backs after that lot ;D
-
Evening, Kev. Are we going for it tonight mate ;)
-
Well done Guys , If I'd been closer I'd have come down as well , cant wait to get my copy of the DVD ;D
-
Can we have names to faces please?
-
Big thanks to TB for comming, helping, bringing tools, and especially from me - bringing spare parts. The bacon butties were great, but it would have been my bacon without TB's trunk full of spare parts!
About 10hrs total. Minor dramas on the cambelts, but nothing serious in the end. Again parts problems for me >:( Had insisted on 2 kits of cam cover gaskets. Checked with sales weenie 3 times. He insisted that it was all I needed. Guess what? Only had gaskets for 1 side :o This time TB was there, and with a spare set [smiley=tekst-toppie.gif] So nothing serious in the end there either.
I'm a lot less sore this time ;) Was almost perfect in terms of repairs, except one gasket broke leaving me with a decent vacuum leak, and even TB couldn't fix my laptop. That thing's cursed! Once moving, the engine runs much better now. New plugs that aren't completely submerged in oil makes a difference! Breather's weren't really clogged?!
After 2 weeks I am really liking my Omega. Maybe repairs are part of the bonding process, but I feel much better to ahve cambelt and cam cover gaskets done. Car runs great, and except for oil change and a few other extremely minor things it doesn't need anything else badly enough to be worth worrying about. Result!
-
Evening, Kev. Are we going for it tonight mate ;)
Evening. ;D ;D
Do you think i should? ::)
-
Evening, Kev. Are we going for it tonight mate ;)
Evening. ;D ;D
Do you think i should? ::)
Oh yes!
-
I'm in the white t-shirt. Although why I am the one with the least flattering pic is beyond me?! :D
-
I'm in the white t-shirt. Although why I am the one with the least flattering pic is beyond me?! :D
;D
And the rest?
-
Evening, Kev. Are we going for it tonight mate ;)
Evening. ;D ;D
Do you think i should? ::)
Oh yes!
Ok then. ;)
-
I'm in the white t-shirt. Although why I am the one with the least flattering pic is beyond me?! :D
;D
And the rest?
Larry, Moe, and Curly. ::)
-
Clues...
Bo Bo is the one with his hands in his pockets, or busy texting, whilst timbuk is doing his car ;D
-
Clues...
Bo Bo is the one with his hands in his pockets, or busy texting, whilst timbuk is doing his car ;D
Hands-in -pocket texting? Now thats a trick I'd like to be able to do!
-
Looks like it all went well.....couldn't get down today as I had to many jobs to catch up on.
-
Clues...
Bo Bo is the one with his hands in his pockets, or busy texting, whilst timbuk is doing his car ;D
Hands-in -pocket texting? Now thats a trick I'd like to be able to do!
It's easy, I can peel an orange in there too :D
-
Clues...
Bo Bo is the one with his hands in his pockets, or busy texting, whilst timbuk is doing his car ;D
Hands-in -pocket texting? Now thats a trick I'd like to be able to do!
Doesnt that make you go blind ;)
-
I'm in the white t-shirt. Although why I am the one with the least flattering pic is beyond me?! :D
One down !
-
Clues...
Bo Bo is the one with his hands in his pockets, or busy texting, whilst timbuk is doing his car ;D
Hands-in -pocket texting? Now thats a trick I'd like to be able to do!
If you ask Bo Bo nice enough he might let you ;D
-
Clues...
Bo Bo is the one with his hands in his pockets, or busy texting, whilst timbuk is doing his car ;D
Hands-in -pocket texting? Now thats a trick I'd like to be able to do!
If you ask Bo Bo nice enough he might let you ;D
What. Me put my hands in Bo Bo's pocket and...........urghhhhh
-
Unknown Person - theolodian - Timbuk - Bo Bo
Could it be Jaime?
-
OK, a [size=14]BIG BIG[/size] thanks to Timbuk, theolodian & TheBoy!
My mechanical experience before today was basically changing oil/fliter plugs/leads, just really basic stuff, but with their help I did it. It's not really that hard & if you've got any experience with the spanners; you can do it. If I had to do it on my own tomorrow; I could (well if my back's recovered).
Thanks again.
-
Unknown Person - theolodian - Timbuk - Bo Bo
Could it be Jaime?
Nah, that's the horse vet Markiec hired to remove Kev's nadger.
-
Blimey,pictures posted even before i get home :D great day, lots done and a chucke along the way. Anyone thinking of doing a cambelt, go for it, it ain't that bad.
Big thanks to Jamie for giving up his time to help us, Theo and Bo Bo have helped me a couple of times this week so a big thanks to them also, But the biggest thanks has to be for Bo Bo's Ma and Pa, Hospitality unrivaled [smiley=thumbsup.gif]
Kev, have you noticed a keyword not been mentioned yet ::)
-
Blimey,pictures posted even before i get home :D great day, lots done and a chucke along the way. Anyone thinking of doing a cambelt, go for it, it ain't that bad.
Big thanks to Jamie for giving up his time to help us, Theo and Bo Bo have helped me a couple of times this week so a big thanks to them also, But the biggest thanks has to be for Bo Bo's Ma and Pa, Hospitality unrivaled [smiley=thumbsup.gif]
Kev, have you noticed a keyword not been mentioned yet ::)
Yeah, hospitality was amazing! Thanks for the help and the refreshements!
-
Kev, have you noticed a keyword not been mentioned yet ::)
Eh, no. Clues? ::)
-
Kev, have you noticed a keyword not been mentioned yet ::)
Eh, no. Is it you're sorry for being nasty to me? ::)
Erm............ nope, have another try :D
-
Kev, have you noticed a keyword not been mentioned yet ::)
Eh, no. Is it you're sorry for being nasty to me? ::)
Erm............ nope, have another try :D
I can wait you know, the time will come, oh yes, the time will come. 8-)
-
Kev, have you noticed a keyword not been mentioned yet ::)
Eh, no. Is it you're sorry for being nasty to me? ::)
Kev, are you feeling OK? Is the stress and debilitating fear becomming too much? I ask, because you are obviously suffering an emotional break from reality if you think we're sorry for being nasty to you ;) ;D
No one is going to censor their feelings when winding up your crank. :o
-
Kev, have you noticed a keyword not been mentioned yet ::)
Eh, no. Is it you're sorry for being nasty to me? ::)
Kev, are you feeling OK? Is the stress and debilitating fear becomming too much? I ask, because you are obviously suffering an emotional break from reality if you think we're sorry for being nasty to you ;) ;D
No one is going to censor their feelings when winding up your crank. :o
Like i said....
...the time will come, oh yes, the time will come. And yes, i'll laugh. ;)
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
-
Well I plugged in the Tech2 into Timbuk's car, so I can conclusively prove if it was a crank sensor or not...
But before I say, we'll let Kev sweat it out a bit longer....
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Ok, let's start by you giving me a PROPER description of the fault. ::)
-
Well I plugged in the Tech2 into Timbuk's car, so I can conclusively prove if it was a crank sensor or not...
But before I say, we'll let Kev sweat it out a bit longer....
If it was, or wasn't, the fault would have been cleared by now anyway, so that's not conclusive. ;)
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Whats this double or quits ;D
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Whats this double or quits ;D
He's tempting fate.....
And it'll go tits up. And i'll be laughing. ;D
-
Well I plugged in the Tech2 into Timbuk's car, so I can conclusively prove if it was a crank sensor or not...
But before I say, we'll let Kev sweat it out a bit longer....
If it was, or wasn't, the fault would have been cleared by now anyway, so that's not conclusive. ;)
Nah, as the car hasn't been used....
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Ok, let's start by you giving me a PROPER description of the fault. ::)
Now that you mention it, in that post where you sold your gonad to the devil I had said that the engine was trying to catch but couldn't quite start . . . ::)
-
Only Jamie has the answer ;)
-
Oh yes, I have the answer.... ....is Kev's bollock safe?
-
Oh yes, I have the answer.... ....is Kev's bollock safe?
Of course they are....
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Whats this double or quits ;D
Kev will soon be a founding member of the Omega Unix Team :D
(If you don't get that, crank the cheesy factor off the scale and try again ;) )
-
Oh yes, I have the answer.... ....is Kev's bollock safe?
Of course they are....
Not
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Ok, let's start by you giving me a PROPER description of the fault. ::)
Now that you mention it, in that post where you sold your gonad to the devil I had said that the engine was trying to catch but couldn't quite start . . . ::)
There ya go, a chink in the armour, partial admission. ;)
-
Blimey,pictures posted even before i get home :D great day, lots done and a chucke along the way. Anyone thinking of doing a cambelt, go for it, it ain't that bad.
Big thanks to Jamie for giving up his time to help us, Theo and Bo Bo have helped me a couple of times this week so a big thanks to them also, But the biggest thanks has to be for Bo Bo's Ma and Pa, Hospitality unrivaled [smiley=thumbsup.gif]
Kev, have you noticed a keyword not been mentioned yet ::)
Just showed this to Ma & Pa & they said you're all welcome any time :D
Oh knackers
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Ok, let's start by you giving me a PROPER description of the fault. ::)
Now that you mention it, in that post where you sold your gonad to the devil I had said that the engine was trying to catch but couldn't quite start . . . ::)
There ya go, a chink in the armour, partial admission. ;)
Yeah, admission that you didn't read the description of the problem! :)
-
Ok, lets start again........
HELP, my car wont start, any ideas Kev :P
Ok, let's start by you giving me a PROPER description of the fault. ::)
Now that you mention it, in that post where you sold your gonad to the devil I had said that the engine was trying to catch but couldn't quite start . . . ::)
There ya go, a chink in the armour, partial admission. ;)
Yeah, admission that you didn't read the description of the problem! :)
Whatever....
Like i say, when it all goes tits up, i'll be laughing. ;D
-
Heres a clue............... A have a receipt for a cambelt kit, a new auxilary belt and er, don't think i've got anymore ::)
-
About the crank sensor, I can categorically confirm that....
-
About the crank sensor, I can categorically confirm that....
Here it comes...............
-
Go on.....
-
Blimey,pictures posted even before i get home :D great day, lots done and a chucke along the way. Anyone thinking of doing a cambelt, go for it, it ain't that bad.
Big thanks to Jamie for giving up his time to help us, Theo and Bo Bo have helped me a couple of times this week so a big thanks to them also, But the biggest thanks has to be for Bo Bo's Ma and Pa, Hospitality unrivaled [smiley=thumbsup.gif]
Kev, have you noticed a keyword not been mentioned yet ::)
Just showed this to Ma & Pa & they said you're all welcome any time :D
Oh knackers
So much for keeping the good life to yourself, eh? ;) Give them a big thanks from me!
-
Blimey,pictures posted even before i get home :D great day, lots done and a chucke along the way. Anyone thinking of doing a cambelt, go for it, it ain't that bad.
Big thanks to Jamie for giving up his time to help us, Theo and Bo Bo have helped me a couple of times this week so a big thanks to them also, But the biggest thanks has to be for Bo Bo's Ma and Pa, Hospitality unrivaled [smiley=thumbsup.gif]
Kev, have you noticed a keyword not been mentioned yet ::)
Just showed this to Ma & Pa & they said you're all welcome any time :D
Oh knackers
So much for keeping the good life to yourself, eh? ;) Give them a big thanks from me!
Done
-
Couldn't agree more, great welcome and hospitality from both of them :)
-
Couldn't agree more, great welcome and hospitality from both of them :)
Will they be as inviting to some scottish visitors?
-
Couldn't agree more, great welcome and hospitality from both of them :)
Will they be as inviting to some scottish visitors?
They might insist on a plum count befoe letting you in ;)
-
Couldn't agree more, great welcome and hospitality from both of them :)
Will they be as inviting to some scottish visitors?
Ney botha, guess where they went for their honeymoon! ;)
-
Theolodian, I've tried to look up part numbers of the seal you need for breather system, and I reckon its:
GASKET, ADAPTOR, ENGINE VENTILATION 90467543
Double check with dealer though...
-
Theolodian, I've tried to look up part numbers of the seal you need for breather system, and I reckon its:
GASKET, ADAPTOR, ENGINE VENTILATION 90467543
Double check with dealer though...
Cheers, I'll head over there in the morning. Going to do my scuttle drain and headlight today. May do oil change, but having trouble working up the motivation ;)
-
Couldn't agree more, great welcome and hospitality from both of them :)
Will they be as inviting to some scottish visitors?
They might insist on a plum count befoe letting you in ;)
;D
-
Scuttle drain cleaned up a treat with Henry. So did pollen filter!
Did everything I could with headlight motor connector. Still has fault.
Except for idle going vroom vroom engine runs great! Now I believe that it is 200HP. Not fast, but it will get around people on B roads. Going to dealer to get that stuff in a bit.
-
It could also be a problem with the levelling motor - sometimes they seize a bit. Not sure how to free them though...
-
It could also be a problem with the levelling motor - sometimes they seize a bit. Not sure how to free them though...
Yeah, the next step is to take the headlight out and start poking around. I may not have a chance to get to it for two weeks or so.
-
Theolodian, I've tried to look up part numbers of the seal you need for breather system, and I reckon its:
GASKET, ADAPTOR, ENGINE VENTILATION 90467543
Double check with dealer though...
Yeah, that's the part number. Idles fine now. Didn't have to disconnect hoses, just undo the 3 bolts and pop it loose.
-
Yeah, that's the part number. Idles fine now. Didn't have to disconnect hoses, just undo the 3 bolts and pop it loose.
Great news. How much was it - I'm guessing it was either 50p or mega bucks...
-
Yeah, that's the part number. Idles fine now. Didn't have to disconnect hoses, just undo the 3 bolts and pop it loose.
Great news. How much was it - I'm guessing it was either 50p or mega bucks...
Don't know, they forgot to charge me for it and the spray paint. Figured it was only fair since they messed up so much on the parts I got earlier! ::)
-
LOL