Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: joff on 03 July 2010, 21:39:14

Title: 2.2dti heater matrix
Post by: joff on 03 July 2010, 21:39:14

How common is it for the heater matrix to go on the facelift,and were is the HBV on the 2.2dti is it in the same place.

Title: Re: 2.2dti heater matrix
Post by: charlie on 03 July 2010, 22:15:58

the hbv is at the drivers side just behind the headlight light and down,easy to see and i would image a pleasure to change compared to a v6 hth :y :y :y

Title: Re: 2.2dti heater matrix
Post by: charlie on 03 July 2010, 22:20:45

all so, i think the diesel omegas have different hbvs,when mine went on my 2.5td the parts bloke said he never sold a diesel one before, i broke mine by doing stupid speed on a long journey :y

Title: Re: 2.2dti heater matrix
Post by: joff on 04 July 2010, 08:26:04

Thanks Charlie I did ask at the dealers and yes it is different than the V6's but there system had it placed on the lefthand side of the block 3/4's back that's the N/S of the car. You said yours was 2.5 that's the BMW engine and this is the 2.2dti so which one are you saying that it's by the head light on. :-?

Title: Re: 2.2dti heater matrix
Post by: charlie on 04 July 2010, 11:10:43

the 2.2 is down by the driver side headlight, :y :y

Title: Re: 2.2dti heater matrix
Post by: joff on 04 July 2010, 11:23:50

In that case it's not the HBV that has a leak. I am now thinking it's the o'seal that I have done twice now and is at the back of the block N/S of car hose that goes from oil cooler to block for cooling will have to get the seal first sod of a job but only cost 70p.