Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ianc on 27 July 2010, 14:58:28

Title: Tools Recquired ???
Post by: ianc on 27 July 2010, 14:58:28

can someone tell me the tools required,to change oil cooler on 2.5 v6 1998 omega.ie star drive sizes and torx sizes.someone was going to lend me some, but has let me down. will now have to order them on ebay.thanks for any help ianc

Title: Re: Tools Recquired ???
Post by: Elite Pete on 27 July 2010, 16:34:03

They're only about £14 at Halfords for a set  ;)

Title: Re: Tools Recquired ???
Post by: feeutfo on 27 July 2010, 18:28:51

19 mill crows foot for oil cooler pipes.....?

Title: Re: Tools Recquired ???
Post by: Lizzie_Zoom on 27 July 2010, 18:35:43

Here's the guide that confirms the 19mm crowsfoot:

http://www.omegaowners.com/forum/YaBB.pl?num=1221081908

 ;) ;)

Title: Re: Tools Recquired ???
Post by: dbug on 27 July 2010, 22:49:37

Quote

Here's the guide that confirms the 19mm crowsfoot:

http://www.omegaowners.com/forum/YaBB.pl?num=1221081908

 ;) ;)

And 30mm socket for oil cooler nuts + I think 22mm sockets/rings for coolant bridge bolts.