Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: P_Russell on 08 August 2010, 18:52:43

Title: Fault code 0430
Post by: P_Russell on 08 August 2010, 18:52:43

EML came on over the weekend

I have fault code P0430 Catalyst System Efficiency Below Threshold (Bank 2)

What does this mean?

I also have 1614 (key transponder) - but starts fine, and 1700 transmission service request.  I assume these are normal and wouldn't cause the EML to come on alone?

Title: Re: Fault code 0430
Post by: P_Russell on 08 August 2010, 18:55:05

And that was my 100th post too.... :y

Title: Re: Fault code 0430
Post by: TheBoy on 08 August 2010, 20:38:48

Ask bro to get his welder out to sort the 0430. Lamdas need moving - serves you right for buying a 3.2 :P

Title: Re: Fault code 0430
Post by: P_Russell on 08 August 2010, 21:05:53

Thanks Jamie - I'll add the job to his list...  I have been reading around the subject but my welding is worse than yours!

And it's a 2.6

Title: Re: Fault code 0430
Post by: TheBoy on 08 August 2010, 21:50:46

Quote

Thanks Jamie - I'll add the job to his list...  I have been reading around the subject but my welding is worse than yours!

And it's a 2.6

Blimey, your welding must be appalling then ;D

The fault is more prevailent on 3.2s, normally 2.6 owners get away with it...

Title: Re: Fault code 0430
Post by: pscocoa on 08 August 2010, 22:59:24

Quote

EML came on over the weekend

I have fault code P0430 Catalyst System Efficiency Below Threshold (Bank 2)

What does this mean?

I also have 1614 (key transponder) - but starts fine, and 1700 transmission service request.  I assume these are normal and wouldn't cause the EML to come on alone?

Have you changed fuel type/make at all or run it down to empty. Is light now off? If so see how long it takes to recur.

Familiar territory for many of us.

Title: Re: Fault code 0430
Post by: P_Russell on 09 August 2010, 07:43:20

No obvious changes in fuel type except I did chuck some injector cleaner in it last week?

I'll get it re-set and see if it re-occurs.  Thanks everyone.