Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: stevepugh on 15 August 2010, 22:32:09

Title: Cruise Control Fitting (Facelift)
Post by: stevepugh on 15 August 2010, 22:32:09

I have a 2.2dti CD and therefore doesn't have cruise. 
The How to Section says all you need is a cruise control stalk and a Tech2 to enable cruise.  is this true?  This would be a very very cheap add on.

Title: Re: Cruise Control Fitting (Facelift)
Post by: MickAP on 15 August 2010, 23:27:51

Not sure whether you have to enable via tech 2 with the DTi.
The TD is auto enabled, in other words plug and play.

Mick ;)

Title: Re: Cruise Control Fitting (Facelift)
Post by: stevepugh on 16 August 2010, 08:37:09

so all omegas have the bits installed to run it?  not like an old omega where you need the cruise module.
Would a stalk from an older Omega work or does it have to be a face lift stalk?

Title: Re: Cruise Control Fitting (Facelift)
Post by: RobG on 16 August 2010, 08:52:09

You will need the 4 wire stalk from any petrol Omega, check that you have the clutch switch fitted. Once fitted will need enabling with TechII. Worth buying new stalk from VX around £35

Title: Re: Cruise Control Fitting (Facelift)
Post by: TheBoy on 16 August 2010, 09:14:37

Stalk, and possibly tech2.

IIRC, DTi already has the clutch switch