Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: MV6Matt on 19 August 2010, 09:34:28
		
			
			- 
				Hi,
 
 The internal direction blades and cage have fallen back into the body of the rear of the centre console. :(
 
 Haynes suggests I've got to dismantle the centre console to get at them. :-/
 
 Can anyone tell me if there's a different/quicker way?
 
 Any advice or experience - please let me know. :y
 Matthew
- 
				Butter knife either side of each vent and they pop out easily. Fish the bits out if you can and re-assemble. If you can't repair them give me a shout as I have a few here :y
			
- 
				Wellung! Thank you very much - worked a treat!
 
 Is it common for not much cold air to get through to these air vents? Front ones are fine and blow with some force as the fan is increased - hardly seems to be getting through to the back ones.
 
 Do I have a blocked centre console? Is there often poor connection through to here?
 
 Any one know please let me know!
 Matthew
- 
				Has anyone experience of checking for potential blockage to the rear vents?
 
 Much appreciated if you have! :y
 
 Matthew :)
- 
				Centre console out is the only way to check the rear vent runs unfortunately.
			
- 
				Centre console out is the only way to check the rear vent runs unfortunately. 
 Oh Bugger!  >:(
 
 ....a job for after the hols then!
 Cheers for the info!
 
 Matthew