Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: zvi on 05 September 2010, 15:58:17
-
small new problem. it's takes the engine several seconds to stabilize
after starting. cold or worm. but drives normal after.
there's error code.
P0110 Intake Air Temperature Circuit High Input
P0110 Intake Air Temperature Circuit Low Input
any idea what's that means?
-
Check wiring and connector on the sensor, in the pipe from airfilter box, situated just before the MAF
-
this is part of the maf on the 2.6....live data woulg give us a clearer picture but do check the connector on the maf