Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Gaffers on 30 August 2010, 06:59:42
-
Been quoted about 70 quid for the pair on TC (including VAT) is that right or am I going to have to speak to the Parts Manager again? ::)
-
Don't think they are on TC. :(
-
Hi Gaffers, did you get my PM re. Sunroof PCB .
-
Worth giving AndyC a ring/pm
"OK following on from the thread about cam cover gaskets and prices i'll do this for OOF members
OE Cam Cover Gasket Kit for V6 Engines
Kit Contains the following
2 x 90511451 Cam Cover Gaskets £22.53 each (£45.06)
16 x 90411826 Cam Bolt Seals £0.14 each (£2.24)
1 x 90485251 RTV Sealant £3.25
1 x 9118135 Pack of Plenium O Rings £9.44
Parts Total £59.99
Postage £3.00
VAT @ 17.5% £11.02
Total £74.00
Part will only be at these prices if brought as a complete kit and is for Vehicle upto chassis 21999999 after which the gaskets change
The above works out to 15% off Vauxhalls trade prices except the RTV which is 10% off
To order either call 01284 777254 and ask for me or email
andyclears@drivevauxhall.co.uk
Cheers
Andy
-
I think he sells it as a job lot, not the gaskets on their own. I have asked......
-
Been quoted about 70 quid for the pair on TC (including VAT) is that right or am I going to have to speak to the Parts Manager again? ::)
Sounds a bit steep paid £24 + vat for one bank two weeks ago T.C.
-
Been quoted about 70 quid for the pair on TC (including VAT) is that right or am I going to have to speak to the Parts Manager again? ::)
Sounds a bit steep paid £24 + vat for one bank two weeks ago T.C.
Yep I paid £24 + VAT each (TC or trade?)
-
£25 per bank sounds about right, it by the time you have all the o-rings and sealeants and VAT that it gets to £70
-
got all mine from http://www.autovaux.co.uk/ here
gaskets are o/e 90511451 £15.95
o rings are o/e 90411826 12p each : :y
-
got all mine from http://www.autovaux.co.uk/ here
gaskets are o/e 90511451 £15.95
o rings are o/e 90411826 12p each : :y
How long have they lasted so far?
Just asking so I can tell you how you have until they fail again :(
-
They are oe gaskets same as as those from gm.
the cam covers ive repaced in the past still ok the largest problem ive noticed is people over tighting the bolts or the covers are wharped from a previous change.
-
They are oe gaskets same as as those from gm.
the cam covers ive repaced in the past still ok the largest problem ive noticed is people over tighting the bolts or the covers are wharped from a previous change.
I don't think they are, IIRC they are Elrig who make parts for Vauxhall but not the camcover gaskets. There have been quite a few people fooled by the oe claim and then had to replace them with ones bought from Vauxhall :(
-
They are oe gaskets same as as those from gm. the cam covers ive repaced in the past still ok the largest problem ive noticed is people over tighting the bolts or the covers are wharped from a previous change.
I have heard that they were different. I tried some from there years ago and they lasted about 6 months. Replaced with genuine and no problems thereafter.
I hope for your sake they have changed/been improved :y
-
got all mine from http://www.autovaux.co.uk/ here
gaskets are o/e 90511451 £15.95
o rings are o/e 90411826 12p each : :y
They are not genuine,going by recent posts. Budget for another £70 quid in the next few months.
-
I think he sells it as a job lot, not the gaskets on their own. I have asked......
Could by the job lot and sell the rest on here or ebay. Going by my drive I can see there is an oil leak issue.
-
I think he sells it as a job lot, not the gaskets on their own. I have asked......
Could by the job lot and sell the rest on here or ebay. Going by my drive I can see there is an oil leak issue.
On yours or mine :o
-
I think he sells it as a job lot, not the gaskets on their own. I have asked......
Could by the job lot and sell the rest on here or ebay. Going by my drive I can see there is an oil leak issue.
On yours or mine :o
Not mine, 3 x 2 inch wide puddles.
Here's the thread re poor Elring seals from autovaux.
http://www.omegaowners.com/forum/YaBB.pl?num=1283724707/26#26
-
They are oe gaskets same as as those from gm.
the cam covers ive repaced in the past still ok the largest problem ive noticed is people over tighting the bolts or the covers are wharped from a previous change.
Don't believe the BS that autovaux spout (often they use clever wording like 'Elring make gaskets for GM', or sometimes they just tell porkies). Did they come in a GM packet, with the GM hologram on? If not, they are a pattern part, and will likely fail within a few months.
For this reason, I never use Autovaux any more.
-
And sorry to be the bearer of potentially bad news :'(