Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: greenman on 16 September 2010, 23:24:54

Title: Door lock pin
Post by: greenman on 16 September 2010, 23:24:54

How do you remove the door lock pins on a facelift?

Title: Re: Door lock pin
Post by: Proz on 16 September 2010, 23:30:13

Prise out the little red tab with a thin screw driver  :y

Title: Re: Door lock pin
Post by: greenman on 16 September 2010, 23:36:07

Thanks again for a fast reply as always.

Title: Re: Door lock pin
Post by: Agemo on 17 September 2010, 11:09:50

You will probably damage the little red tab. A better option is to tie a piece of string to the button, and give it a big sharp tug upwards, chances are it will come off with no damage at all.  :y

Title: Re: Door lock pin
Post by: Proz on 17 September 2010, 11:41:14

I never left a mark on mine ... i used the thinest thing i could get and very gently prised it out  :y

Title: Re: Door lock pin
Post by: Raymienets on 17 September 2010, 22:44:55

Quote

I never left a mark on mine ... i used the thinest thing i could get and very gently prised it out  :y

Aye same here, thats how I do it.

Title: Re: Door lock pin
Post by: greenman on 17 September 2010, 22:52:05

Got them out.Used a mini stanley blade not a mark on them.

Title: Re: Door lock pin
Post by: Agemo on 17 September 2010, 23:07:16

Either way, job appears to be a "good 'un".

Title: Re: Door lock pin
Post by: Elite Pete on 17 September 2010, 23:08:25

The door card will slide over the pins without removing them ;)