Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MV6Matt on 24 September 2010, 15:59:46

Title: Anti Roll Bar advisory
Post by: MV6Matt on 24 September 2010, 15:59:46

Got the Estate through the MOT today.......... ::)

Following advisory item
001 (both front) Anti-roll bar has slight play in a pin/bush [2.4.G.3]

The tester explained that these were round rubber/plastic rings that get worn.

..... I now know what the  knocking noise is when driving!( :-[)

Anyone get me the part number(s) and is it car up and wheels off to replace?

Matthew

Title: Re: Anti Roll Bar advisory
Post by: feeutfo on 24 September 2010, 16:09:01

Nah, can do on drive, easier if both sides are jacked on stands. Two nuts to undoo, but they sometimes sieze with the road grim a and rust on the exposed thread.

Title: Re: Anti Roll Bar advisory
Post by: MV6Matt on 24 September 2010, 19:03:45

Quote

Nah, can do on drive, easier if both sides are jacked on stands. Two nuts to undoo, but they sometimes sieze with the road grim a and rust on the exposed thread.

Cheers Chris,
What do I ask for when ordering? Is it Anti-roll bar bush? :-?

M

Title: Re: Anti Roll Bar advisory
Post by: PhilRich on 24 September 2010, 19:50:12

Part No: 90445625 Anti Roll Bar Bush


(http://i863.photobucket.com/albums/ab197/philrich1064/90445625N_1.jpg)

Title: Re: Anti Roll Bar advisory
Post by: MV6Matt on 24 September 2010, 19:54:56

Quote

Part No: 90445625 Anti Roll Bar Bush


(http://i863.photobucket.com/albums/ab197/philrich1064/90445625N_1.jpg)

Cheers - Anti  roll bar bush it is!  :y :y