Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: jim513 on 03 October 2010, 13:22:00
-
Hello all
Just done a paperclip test and got 55 followed by 4 quick flashes and 31 can someone verify what the 55 and 4 and what no RPM signal means please.
thanks Jim
-
Check it again code 4 does not exist.
55 Replace Electronic Control Unit (ECU)
31 just means your engines not running.
-
I checked again and i still got 55 followed by 4 quick flashes the reason i done test in first place is because i've broken down in kent and greenflag cant get me going reckons it might be a crank sensor would that be the 31 fault code
Jim
-
I checked again and i still got 55 followed by 4 quick flashes the reason i done test in first place is because i've broken down in kent and greenflag cant get me going reckons it might be a crank sensor would that be the 31 fault code
Jim
19 Incorrect RPM Signal Crank sensor.
-
Ok thanks mate....back to scratching my head then.
-
One of our experts will be here in a sec. with some advice. :y
-
hi folks also have 19 code and unsure where best place to buy the genuine crankshaft sensor as stealers give me 2 kinds and unsure which one but prices vary between 60 and 100 any input please many thanks
-
Try a PM to AndyC, a member on here who can post you genuine parts at trade club prices as he is a parts manager for Vauxhall. :y
-
many thanks for that have a good day :y
-
hi folks also have 19 code and unsure where best place to buy the genuine crankshaft sensor as stealers give me 2 kinds and unsure which one but prices vary between 60 and 100 any input please many thanks
3.0 take same as 2.6/3.2, despite what EPC tells them. 2.5 can have either, but normally the more expensive one.