Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Kaycee on 19 October 2010, 13:01:38
-
Hi
i have had some work done on my engine i e oil pump change but on looking at the aux belt it doesnt look right . all the ancillarys a running clockwise but the water pump anti clockwise does any one have a diagram of the belt run to confirm
tia
Rob
-
(http://i190.photobucket.com/albums/z257/belisensis/OMEGAFORUM/V6AuxBeltRoute.jpg)
-
Sounds right to me K, I'm OK with the V6's, it's always the 4 pots I spend 5 minutes scratching my head trying to remember which way they fit ;D ;D I've now drawn both on the inside of my toolbox lid ;D ;D
-
Aye thanks for that yes it is exactly as diagram (thanks Rob G) but since it came back it doesnt sound quite right there is a "Drrrrrrmmmm-------Drrrrrrrmmmm ----------Drrrrmmmmmm from pass side i think, i know that sounds daft but thats the sound its making constantly and thats since i had the oil pump changed i wondered if it was the aux belt but its only a year old unless the cam wheels have not been put on right, oh woe is me
rob
-
Check the tensionner bearings are not dry!! ;)
-
Aye thanks for that yes it is exactly as diagram (thanks Rob G) but since it came back it doesnt sound quite right there is a "Drrrrrrmmmm-------Drrrrrrrmmmm ----------Drrrrmmmmmm from pass side i think, i know that sounds daft but thats the sound its making constantly and thats since i had the oil pump changed i wondered if it was the aux belt but its only a year old unless the cam wheels have not been put on right, oh woe is me
rob
Are you sure it isn't more of a dugga-dugga-dugga? ;)
-
Thanks DBug just checked it and it was the tensioner it sounds a likes its on way out it is not silent running ive put some grease in but dont sound much better so ive ordered a new one thanks once again
Rob