Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Vamps on 30 October 2010, 01:02:42

Title: Where is the heater motor fitted??
Post by: Vamps on 30 October 2010, 01:02:42

As above, where is it and how do I access it?

Title: Re: Where is the heater motor fitted??
Post by: feeutfo on 30 October 2010, 01:48:57

Glove box out, air bag out, and a load of other stuff I believe and it's in there somewhere, where's TB's pic of a stripped back dash...?

Title: Re: Where is the heater motor fitted??
Post by: Welung666 on 30 October 2010, 10:28:35

Has yours gone Mike? I'm about to start stripping a dash out now on this breaker if you need one. I can take pics to if you need me to?

:y

Title: Re: Where is the heater motor fitted??
Post by: dbug on 30 October 2010, 13:56:50

Glovebox out mate - no need to remove or disconnect air bag though.
Need to remove cable tray (cut off all the tape - unclips one end then pull out).  Blower motor 3 torx screws and unplug power then wriggle out.  As Hayes refitting reverse of removal - one of the torx screws is a barsteward though!! When refitting cable tray tie wrap cabling to it.

Good luck Mike :y