Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: vauxhallvauxhall on 25 October 2010, 20:12:00
-
is retro fitting cruise control to a manual 2001 v6 facelift possible/difficult
-
yup, presumably its a 2.6 or 3.2, in which case its a stalk and a chat with a tech2
-
Just make sure you get the stalk with 4 wires and not the 2 wire version. :y
-
does the stalk just plug in under dash
-
It replaces the indicator stalk as the buttons are on the end :y
-
fitted new switch computer does not recognise but measuring blocks show i & r working but on off inactive
any suggestions
-
yup, presumably its a 2.6 or 3.2, in which case its a stalk and a chat with a tech2
Sounds like you need the above, then. Chat with tech 2 :y
-
fitted new switch computer does not recognise but measuring blocks show i & r working but on off inactive
any suggestions
How about some more information first? :)
Which V6 engine?
-
2.6 se manual gearbox
-
As stated, it now needs activating with Tech II
-
As stated, it now needs activating with Tech II
Also may need a clutch switch
-
can give information on clutch switch part number if possible and where it plugs
-
no idea on part number but it fits on the the pedal box above the pivot for clutch pedal. Pretty obvious really - a bit like a brake switch but on the clutch pedal
just akward to get to!